For single rides, adult Clipper cards get a 6.25% discount on cash value rides by buying $48 worth of value for $45 or $64 worth of value for $60. HVD applies only to BART rides. You can only purchase an HVD ticket online by setting up Autoload or through a transit benefit program.

How much does a Clipper card cost?

How much does a Clipper card cost? There is a one-time $3.00 acquisition fee for a Clipper card. Clipper will waive this fee if the buyer signs up for Autoload at the time of purchase online at Youth and senior cards are free.

Does BART have monthly pass?

9. Q: Does BART have/why doesn’t BART have a monthly pass? A: BART fares are calculated on the distance traveled, and there are no “time-based” passes for BART. Shorter-distance riders would unfairly bear the burden of the trips taken by daily, long-distance riders using a monthly pass.

Did BART get cheaper?

In an effort to get people back on the train gang, BART announced on Tuesday that they will offer a special promotion of 50% off all fares on Clipper for the entire month of September 2021. Currently the cheapest one-way fares are $2.10 using BART, which will drop to $1.10 for September.

Can 2 people use a Clipper card?

To clarify – a Clipper Card is agnostic of the person using it, but two people can’t use it at the same time. For example, you could use it in the morning, and someone else could use it in the afternoon.

Are Clipper cards free?

You’re joining the millions who choose Clipper. Order your adult card online or buy one in person for just $3. If you order online and set up automatic reloading, your card is free! Youth, seniors and riders with disabilities can receive reduced fares and passes with a discount Clipper card.

Is Bart expensive?

BART is expensive, I suspect, for a few reasons: Their pricing takes into account the alternatives as opposed to true cost of operation. For example, to go from Berkeley to downtown San Francisco is $8.00 but to drive your car and cross the Bay Bridge is $5.00 + parking + gas/maintenance.

Is BART free on Spare the Air Day?

On the first five non-holiday weekdays declared a “Spare the Air” day by the Bay Area Air Quality Management District, anyone entering a BART station between 4 a.m. and 9 a.m. can ride BART for FREE!

How can I save money on BART?

One of the easiest ways to get a deal is to get a Clipper Card. Use it and get a 6.25% percent discount on BART rides. – Seniors and those with “qualifying disabilities” can get a discount of 62.5%. And soon, if you are a low income earner, there will be a discount for you too.

Do Clipper cards expire?

Unlike a credit or debit card, the Clipper card does not expire; however, you will need to renew your eligibility for Clipper START once every two years to continue receiving the discount.

Article first time published on

Does the Clipper card work on BART?

Clipper Cards and Pay By Phone Riders pay for BART with a Clipper card, which also has an app and works with Apple and Andriod phones. While Clipper is used to pay for BART, it is not a BART product. Clipper is the Bay Area’s all-in-one transit card administered by the Metropolitan Transportation Commission.

Can you pay BART parking with Clipper card?

To pay for Daily Fee parking, register a Clipper card number on your profile and enter a stall number to pay. You may pay for parking either ten minutes before or after entering the faregates. Use the Clipper card registered in your parking account to enter the fare gates to show you are a BART rider.

Can I load my Clipper card at Walgreens?

Walgreens stores are currently unable to sell or add value to Clipper cards. We encourage you to add value at another in-person location or online.

Can you add value to Clipper card at BART station?

All BART Stations have Clipper vending machines which accept cash, credit cards and debit cards as payment. You can add cash value to Clipper cards at all BART ticket machines.

How do I check how much money is on my Clipper card?

If you need to check your balance or card usage history: Log into your My Clipper account and click on “Check card value” or “Check card activity” Contact Clipper Customer Service at 877.878. 8883, TDD/TTY 711 or 800.735.

Can I put my Clipper card on my phone?

No Need to Unlock Your Phone to Use Clipper To pay using your phone or Apple Watch, you don’t need to unlock your phone. With an Android phone, you only need to turn your phone screen on before holding it up to the Clipper reader.

How much does the BART cost?

The fares start at $1.95 for short rides, up to $15 or more for the longest rides that include airports. These machines (shown in the picture on the left) take cash (in $1, $5, $10, and $20 increments), ATM/debit cards, as well as credit cards. Once you pay for your ticket, you’ll have to get to the train itself.

How much did the BART cost?

Total Cost of Original BART System$1,619,000,000Sources of Funding:1962 General Obligation Bond Referendum$792,000,000California Toll Bridge Authority$176,000,000Proceeds of Sales Tax Revenue$150,000,000

Why is BART so infrequent?

The reason for BART’s lack of hand-holds is because when the trains were originally built, BART imagined that all riders would be seated…

How do I transfer money from one Clipper card to another?

To transfer your unused cash balance to a new card, you need to purchase a new adult Clipper card on your device and then call Clipper Customer Service at 877.878. 8883 to request a balance transfer.

What is a Clipper start Bart?

Clipper START is an 18-month pilot program initiated by Bay Area transit agencies and the Metropolitan Transportation Commission (MTC) that uses the Clipper transit fare payment system to reduce the cost of transportation for adults whose household incomes are no more than twice the federal poverty level (for example, …

Do Berkeley students get free BART?

As a UC Berkeley student, you qualify for a free Student EasyPass with AC Transit. … As long as you are an eligible UC Berkeley student, your EasyPass will be automatically renewed each semester — one week before until one week after the start of the fall and spring semesters.

Is Bart running in the Bay Area?

Starting August 2, 2021, BART will expand its hours and significantly increase service: Weekday service will be 5am-12am (currently 5am-9pm) with 15-min frequencies on all lines from 5am-8pm and 30-minute frequencies from 8pm-midnight.

Is the BART train free?

BART and other rail systems (CalTrain, Ace Train) and ferries will be free until 1:00 p.m. All regional bus systems will be free all day. Keep the air as clean as possible by taking the bus, walking or riding your bike to the BART station. … All other BART rules will also be in effect, including no eating or drinking.

Can you pay for BART with a credit card?

All BART Stations have Clipper vending machines which accept cash, credit cards and debit cards as payment. You can add cash value to Clipper cards at all BART ticket machines.

Can you BBQ with propane during a Spare the Air Day?

While fires for cooking are not prohibited during Spare the Air Alerts, consider public health and be mindful of air quality on these days. Consider using a gas or propane barbecue rather than a wood or charcoal-fired cooking device.

What are the benefits of a Clipper card?

The Clipper card is a reloadable card that can be used to pay transit fares in the Bay Area instead of using cash or paper passes. The card keeps track of the value loaded on it and automatically deducts the correct fare (including transfers and discounts).

Can I use Clipper card in San Diego?

Transit services Clipper is not accepted on Amtrak California’s Capitol Corridor or San Joaquins trains, despite these serving the Bay Area.

How do I use Clipper app with Bart?

To pay a fare with Google Pay, riders simply wake their phone, hold it near the Clipper reader and then board the bus, train or ferry. They no longer need to touch a ticket machine or reload a Clipper card at a retailer.

How does Bart know if you paid for parking?

Bart police checks the parking lots regularly. Depending on whether you have a paid parking permit, or a one day parking slot, you need to make sure you are parking in the accurate spot, & that you’ve paid the spot before boarding the train. Bart police constantly circles the lot so better to be safe than sorry!

How do you use Clipper card on iPhone?

1. Open the Wallet app on your iPhone and press the plus “+” icon.
2. Select Transit Card.
3. Select “Clipper card” from the list and tap Continue.
4. Select the value amount to add and follow prompts to complete purchase (Note: This is the only way you will be able to add cash value to your phone in Apple Wallet)