Most counter-depth fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).

How deep are cabinet depth refrigerators?

Counter-depth refrigerators are typically under 30 inches deep. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range. So, in many kitchens, traditional refrigerators may stick out half a foot or more from the edge of the kitchen counters.

What is difference between counter-depth and cabinet depth refrigerator?

Counter-Depth Refrigerators Defined Generally speaking, a kitchen’s counters will arrive at around the 25-inch mark when their depth is measured and cabinets are typically 24 to 24 1/2-inches deep. … Manufacturers make fewer counter-depth products compared to standard depth fridges which affects unit-level cost.

What sizes do counter depth refrigerators come in?

Standard fridges are 30 to 36 inches wide, while counter-depth refrigerators are usually at least 36 inches wide. They’re also taller, starting at 70 inches, while standard fridges are between 67 and 70 inches.

What's the difference between counter-depth and standard depth?

Standard depth refrigerators take up more space, generally running 30 to 34 inches in depth, or 35 to 36 inches when the doors and handles are included. … Counter depth refrigerators are shallower and wider than standard depth refrigerators, with a depth range of 23 to 27 inches.

What is the average depth of a refrigerator?

Refrigerators are categorized between counter-depth and standard-depth models, with refrigerator depth ranging from 24 to 36 inches deep. Counter-depth fridges align with the edges of countertops and measure between 24 to 30 inches deep, whereas standard-depth appliances may extend to 30 to 36 inches.

How far is too far for a refrigerator to stick out?

In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.

What is the standard counter-depth?

While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.

Are counter depth refrigerators smaller?

Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. … The fridge box sits flush with the countertop, however the doors make the unit stuck out an additional 2-3 inches providing the doors enough room to open and close.

Why are counter-depth fridges so expensive?

Manufacturers often use thicker, more expensive insulation materials to maximize interior space. This contributes to their higher price. There are many styles of counter-depth refrigerators, including French door and side-by-side models.

Article first time published on

What is the standard-depth of kitchen cabinets?

Height, without countertop34 1/2 inchesHeight, with countertop35 to 36 inchesDepth (front to wall), without countertop24 inchesDepth, with countertop25 to 26 inchesStandard widths12, 18, 24, 30, 33, 36, 48 inches

What does cabinet depth refrigerator mean?

When it comes to compact, under-counter refrigerators, coolers and freezers, these are usually referred to as cabinet-depth and though these can vary from the standard, most will be 24 inches so that they will be flush with the cabinetry once installed, much the same as a built-in dishwasher.

Are all counter-depth refrigerators the same size?

What is the standard size of a counter-depth refrigerator? A standard counter-depth refrigerator generally ranges from about 24–30 inches in depth not including handles as compared to 30–36 inches for a standard size refrigerator.

How far should a refrigerator be from the back wall?

The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge. Subtract the minimum clearance from initial space measurements to find the maximum dimensions of the refrigerator models you can consider.

What is the standard cabinet opening for a refrigerator?

The standard opening for a refrigerator is usually 36” wide and the wall cabinet over it is usually 36” in width.

How much space is needed between cabinets and refrigerators?

Behind the Cabinet All that’s needed is 1 to 1 1/2 inches behind and over the coils to ventilate properly. Older models or models with through-the-door features such as ice, water and snack fixtures might require more ventilation space.

Does refrigerator depth include handles?

The depth of a refrigerator is the measurement from the back of the unit to its front and does not include its door handle. … Counter-depth refrigerators usually are fewer than 24 inches deep, not including handles, and they have an average storage capacity of 22 cubic feet.

Will a pizza box fit in a counter depth refrigerator?

Yes you can fit everything in a new counter depth model, but to fit it all, you can go with the side-by-side in the Whirlpool Ice collection or choose one of many other options especially from Kitchenaid.

What is the best month to buy a refrigerator?

The best time to buy appliances is when new models roll out: washers, dryers, and dishwashers in September and October, refrigerators in May, and ranges/ovens in January. When manufacturers unveil the latest models, retailers reduce prices on models from previous years to create more room for the new inventory.

Do counter depth refrigerators cost more?

Counter-depth appliances typically cost about 15 to 20 percent more than standard refrigerators that have comparable features, and it is not uncommon for the appliance to be slightly smaller in capacity.

How much should a countertop overhang?

How far should a countertop overhang on the side? Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.

What are standard cabinet sizes?

• Upper kitchen cabinets are 12, 15, 18, 24, 27, 30, 33, and 36 inches.
• Upper filler cabinets are 3, 6, and 9 inches wide.
• Standard base cabinet widths are 12, 15, 18, 21, 24, 26.25, 27, 30, 33, 26, 39 and 42-inches.

How much space should be between countertop and upper cabinets?

The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.

How much gap do you need around a fridge?

Remember to leave 25 mm of free space around the top, back and sides to allow for the heat produced during refrigeration to escape. Be sure to also measure clearance (entryways, doorways etc.) to ensure that when your fridge is delivered it will fit safely into the home, and your old fridge can be safely removed.

What is a hidden hinge on a refrigerator?

A hidden hinge, also known as a concealed hinge, is a hinge that can’t be seen when viewing the door from the front and/or side. If you have seen European-style hinges, you have seen concealed hinges. They are designed to create an aesthetic look, one that is seamless and can be made to match cabinetry, if needed.

What is a standard fridge space in a kitchen?

What is the Standard Fridge Size? There is no actual standard fridge size, however there is a standard fridge cavity that should be allotted as the floor space occupied by the fridge. This makes the standard fridge size smaller than the the typical fridge cavity which is: 1800mm high, 900mm wide, and 600mm deep.