A depth gauge is used to provide a flat surface across the teeth of your chainsaw’s teeth to provide a guideline for filing them down to the same height. Step 1: Place a round file on a tooth on the left hand side and, holding it at a 45 degree angle, pull it in a single direction across the tooth.

What is a chainsaw depth gauge?

A depth gauge is used to provide a flat surface across the teeth of your chainsaw’s teeth to provide a guideline for filing them down to the same height. Step 1: Place a round file on a tooth on the left hand side and, holding it at a 45 degree angle, pull it in a single direction across the tooth.

How often do you file rakers?

More experienced cutters have a good feel for how their saw is cutting, and simply take their rakers down whenever they seem to need it. In my case, that’s about once every five sharpenings, more or less, assuming nothing extraordinary happens, like hitting a rock.

What is a depth gauge tool?

A depth gauge is an instrument used to measure the depth of a bored hole, drilled hole or cut. Often referred to as a depth micrometer, the depth gauge can be a precision-build measuring tool that is able to give the depth reading in a variety of measurements.

What is the difference between .325 and 3/8 chain?

The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. … 325-inch chain for those saws between 40 and 60 cc.

Who uses a depth gauge?

A depth gauge is an instrument for measuring depth below a reference surface. They include depth gauges for underwater diving and similar applications, and engineering instruments used to measure the depth of holes and indentations from a reference surface.

What size chain is on my Stihl chainsaw?

The Stihl company stamps its chains with a number, called a Marketing Number, that will help you identify the size of the chain. Locate the Marketing Number stamped on the side of the chain. This number consists of four or five characters, which may be letters or numbers.

What are chainsaw rakers?

Depth gauges, “riders,” or “rakers,” as they are sometimes called, control the amount of wood severed by a cutter tooth. During the life of a pro saw chain, they occasionally need maintenance for top cutting performance. … Each time the chain is sharpened, the top corner of the cutter tooth gets lower.

What are the parts of a chainsaw chain?

• Cutter.
• Rivet.
• Drive Link.
• Tie Strap.

Why does my chainsaw cut at an angle?

Check the size of the top plates, which sit on the longer sections of each tooth on the chain. These top plates should be the same size. If some are shorter than others, file the longer ones down to match. Keep the same angle on all the top plates as you file – angles that don’t match also can cause curved cutting.

Article first time published on

What angle do you sharpen a Stihl chainsaw?

STIHL saw chains are generally filed to an angle of 30° – parallel to the service mark for the filing angle. Hold the file so that one quarter of its diameter projects above the top plate.

What size chain is on a Stihl ms180?

MS 180 Specifications – Occasional UsePOWER SOURCEGasGUIDE BAR LENGTH (Recommended)16 in.OILOMATIC® CHAIN3/8″ PMM3CHAIN OIL CAPACITY4.9 oz.

What size file do you need for a 3/8 chain?

Chain PitchFile Diameterin.mm.in.3/8 PMN9.325/321/4 3/8 PM6.35 9.325/320.3258.253/16

What does 91 mean on chainsaw chain?

91 = 3/8 low profile pitch .050 gauge or 1.3mm. 95 = .325 pitch .050 gauge or 1.3mm. Carlton drive link codes. ​A1 = 3/8 pitch .050 gauge. A2 = 3/8 pitch .058 gauge.

Are .325 and 3/8 chains interchangeable?

3/8” and 0.325” chains are NOT interchangeable.

Is my chainsaw chain dull?

When cross cutting (against the grain of the wood) a dull chainsaw chain creates fine sawdust instead of coarse strands. The saw is producing smoke even when your chain is oiled and the chain tension is correct. The chainsaw produces an uneven cut. This could mean that your chain has dull cutting teeth on one side.

Can I put an 18 inch bar on a 16 inch chainsaw?

Yes, but you need a bar designed to fit on your saw. There are different designs for different saws, and the bar has to match the chain/sprocket configuration as well.

Which chainsaw chain is best?

• Best Overall. Husqvarna Chainsaw Chain 16″ . …
• Runner Up. Oregon R40 AdvanceCut 10-Inch Chainsaw Chain. …
• Best Bang for the Buck. Oregon S33 AdvanceCut 8-Inch Chainsaw Chain. …
• Best Full Chisel. Forester Chainsaw Chain Loop, 24″ Full Chisel. …
• Best Semi Chisel. …
• Best Micro Chisel. …
• Best Low Profile.

When should I replace my chainsaw chain?

• Teeth are broken or worn unevenly.
• Issues with Chain Tension.
• Smoke is present when cutting.
• Sawdust, rather than coarse chips are left behind.
• Chainsaw feels unbalanced, cuts unevenly, or rattles when in use.

What chainsaw chains do professional loggers use?

Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.

How can I tell what pitch my chainsaw is?

To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

Do Oregon chains fit Stihl chainsaws?

Oregon R55 AdvanceCut Chainsaw Chain for 16-Inch Bar -55 Drive Links – low-kickback chain fits several Stihl models. … This 14″, 3/8″ pitch chain fits several Stihl saws including 017, 019, MS 170, 018 and MS 191T. See back of package image for a complete list of saws that this chain fits.

What are the limitations of depth gauge?

Disadvantages: requires skill in handling and in reading the results. dedicated gage can not be used for other purposes.

What is the purpose of the depth gauge and how are they set?

A depth gauge is a precision measuring instrument, designed specifically to measure the depth of holes, recesses, cavities and distances from a plane surface to a projection. In other word, a depth gauge is a variation of the ruler.

What is the least count of depth gauge?

Least Count of Depth Gauge The least count of digital type depth gauge is 0.01 mm.

What makes a chainsaw chain A safety chain?

Depth gauges function as a safety feature, because by regulating the size of the chip, they also regulate the severity of reactive forces. The thicker the chip, the more severe the potential kickback.

What is the blade part of the chainsaw called?

The cutter teeth come in two parts; right-hand and left-hand cutters. These teeth are the meat and bones of your chain. They are the cut force of the blade itself and chip away at the wood you are using your chainsaw on. Cutter teeth come in different types too, which are called cutting tooth profiles.

What is a chainsaw bumper spike?

A bumper spike is used to rest the chain saw on wood as you are cutting to prevent kick- back, especially when performing a buck cut. An anti-kickback chain reduces the forces on the chain that cause kickback. A tip guard at the end of the chainsaw bar helps prevent kickback.

Why does my chainsaw chain dull so quickly?

Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.

Is it worth sharpening a chainsaw chain?

Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.