Plazit-Polygal produces a range of flexible multi wall thermoplastic sheets that are ideal for many roofing, glazing, skylights, signage and interior design projects. They enable you to manage the available light and provide insulation and UV-protection, as well as adding texture and color to your project.

How much does Polygal cost?

ColorThicknessPrice Per Square FootPolycoolite*8mm Polycoolite Twinwall, available in 4′ widths only Polycoolite$3.05Clear10mm Twinwall$2.71Clear16mm Triplewall$4.20Ice or Bronze6mm Twinwall$2.06

What is poly gal?

PLAZIT-POLYGAL offers extruded acrylic and polycarbonate solid sheets in gauges ranging from 1.5mm – 12.7mm in both general purpose and UV resistant grades.

Can you walk on Polygal?

Avoid walking on the Polygal at any point during the installation. 2. Check that you have all the necessary materials to correctly install the Polygal before starting installation. Once your Polygal sheets are screwed into place, you should apply the vent tape to seal off open flutes ASAP.

What is a Polygal roof?

The roofing sheets allow you to enjoy the outdoors with protection from unwanted outdoor conditions. … polygal sits on top of your pergola, allowing the sun to peek through while blocking out elements such as rain and snow.

How do you cut Polygal?

Polygal Multi wall sheet can be cut easily and accurately with standard workshop equipment. This includes standard circular, jig, or table saw with a blade having 8-12 teeth per inch. Saw dust should be blown out of the channels using clean compressed air. Circular saws should have fine-toothed panel blades.

How long does polycarbonate roofing last?

Longevity. Both types of polycarbonate roofing last anywhere from 10 to 20 years.

How much weight can polycarbonate withstand?

Its ultimate tensile strength of 9500 psi and yield tensile strength of 9000 psi means that it would be able to withstand the pressure of being approximately 20,000 feet underwater before suffering permanent deformation or breakage.

Is polycarbonate roofing too hot?

Polycarbonate is also very lightweight and capable of withstanding extreme temperatures, either hot or cold. … Due to these qualities it makes for an effective roofing material for many applications.

Can I step on polycarbonate roofing?

Not all roofs are designed to be walked on. Plastic or polycarbonate roofing is usually considered non-trafficable. When it is necessary to walk on plastic sheets, you need to provide roof ladders or walk boards as a temporary crossing. Regardless of the roof type, walking on a roof can be dangerous.

Article first time published on

Which is the best polycarbonate roofing?

Multiwall polycarbonate is effective for roof glazing, conservatory glazing, carports, porches, lean-tos, orangeries, swimming pool roofs and greenhouses. It is unlike any other material. Here are some of the perks: Twinwall/multiwall is safe: It is up to 250x stronger than glass – yet also much lighter.

Are polycarbonate roofs good?

Polycarbonate is a strong thermoplastic material that is lightweight and can withstand extremely low and high temperatures. This durable and practical roofing material is perfect for conservatories, patios, and deck areas, but it’s not practical to cover the entire roof of a house.

What screws to use on polycarbonate sheets?

#9 x 1-1/4″ screws used to fasten corrugated polycarbonate sheets to wood base. 100 screws with neoprene sealing washers per bag.

How do you attach polycarbonate sheets to a greenhouse?

Use screws with neoprene bonded washers to fasten polycarbonate to greenhouse. Use ½″ washers with corrugated polycarbonate and 1″ washers with triple wall polycarbonate. Do not fasten screws within ½″ of the edge of a polycarbonate sheet. When fastening screws, do not tighten below the surface of the panel.

What are the disadvantages of polycarbonate?

The main disadvantage of polycarbonate is that it isn’t resistant to scratches. For example, if a branch should happen to fall on a patio canopy made of polycarbonate, it may be scratched. This problem can be solved by polishing the polycarbonate.

Do polycarbonate roofs leak?

Polycarbonate conservatory roofs are made by building a roof structure and affixing plastic panels onto it. … Both can wear down over time, causing leaks between panels and the roof frame.

How do you maintain polycarbonate roofing?

Cleaning polycarbonate is very simple. All you need is warm or room temperature water, mild soap, and a sponge or soft cloth. You start with cleaning the roof with plain water. Then, you mix the soap and water to make a soapy solution, and wash the roof with it.

Can I drill polycarbonate?

Standard wood working drill bits are suitable for drilling holes in polycarbonate sheet. … Do not under any circumstances use a centre punch on a polycarbonate panel, it’s very likely to cause damage. It’s a good idea to start by drilling a small pilot hole to help locate the drill.

Can you use a router on polycarbonate?

In principle, it’s possible to Routing both twin-wall and solid polycarbonate sheets. However, we strongly recommend that you opt for solid polycarbonate sheet when routing. … But it’s easy to rout polycarbonate sheet using regular DIY tools, such as a wood milling machine or router.

Can you cut polycarbonate with a jigsaw?

Polycarbonate sheets can be cut with either a circular saw or a jigsaw. A circular saw is the best tool for cutting larger polycarbonate lengths. Thanks to the properties of this material, polycarbonate won’t crack or splinter around the cut.

What roofing sheets are best?

• Foam-backed polycarbonate roof sheets are lightweight and durable. …
• Clear polycarbonate sheets are installed in patios, sunrooms and places that need natural light through the roof.

Does polycarbonate yellow with age?

Unlike acrylic though, the colour clarity of polycarbonate does diminish over time and will adopt a yellow hue with prolonged exposure to the UV rays.

What is better PVC or polycarbonate?

Though not quite as effective as polycarbonate roofing sheets in resisting impact, the majority of PVC roofing sheets will remain intact in most cases of collision. Unlike polycarbonate sheets, however, PVC roofing sheets are usually scratch resistant.

Which is stronger plexiglass or polycarbonate?

Polycarbonate Material vs Acrylic Material. … Generally speaking, acrylic sheeting is shinier and polycarbonate sheet is stronger. Acrylic and polycarbonate both weigh less than half of what a comparably sized piece of glass weighs yet they are both much stronger than glass. Both materials are also very easy to clean.

Does polycarbonate scratch easily?

Like acrylic, polycarbonate has some cons to consider. It is typically not a shiny material, but it can be polished. Although it resists cracking and chipping, it dents and scratches easily.

Who invented polycarbonate?

Dr. Hermann Schnell of Bayer invented polycarbonate (PC) resin in 1953, just one week before chemist Dr. Daniel Fox of GE made the same discovery while working on developing a new wire insulation material.

How much do you overlap polycarbonate sheets?

Only one corrugation overlap is required on sides of sheets. Do not stretch or force sheet to overlap. Cover long spans by overlapping sheets a min. of 4”.

Do I need closure strips for polycarbonate roofing?

Closure strips enhance the appearance of your polycarbonate or PVC panel project. Providing weather tightness, plastic or foam closure strips are recommended for sealing the opening created where the corrugated sheet meets flat surfaces at flashing, curbs, etc.

Can you paint polycarbonate roofing?

Make sure you use a primer that is suitable for polycarbonate, and that you can paint over, such as Redox BL multi primer from Sikkens. A primer ensures good adhesion to the panel surface and creates an excellent adhesive base for the paint. Always read the instructions carefully before use.

Is PVC same as polycarbonate?

PVC and Polycarbonate are two important and commonly used thermoplastics. The main difference between PVC and Polycarbonate is that PVC is composed of a chloride group whereas Polycarbonate is composed of a carbonate group.

Can a polycarbonate roof be flat?

Solid polycarbonate sheets are ideal for homeowners that prefer a flat form factor to corrugated sheets.