What is Mitsubishi H2i? Mitsubishi Electric has introduced Hyper-Heating INVERTER® (H2i) technology, a significant advance in heat pumps. H2i uses an enhanced compressor system to deliver heat even when outdoor temperatures are as low as -13° F. … Hot-Start technology provides warm air instantly.

What does Hyper-heat mean?

What is Hyper-Heat. Hyper-Heat is a heat pump system, but it adds an exclusive Inverter™ technology that allows it to maintain its efficiency when temperatures drop all the way down to negative thirteen degrees Fahrenheit. … Since ductwork isn’t required for this type of system, it’s a great fit for any application.

What is hyper-heat mini split?

This means that it is composed of an indoor unit called air handler and an outdoor unit which is the compressor. As a ductless mini split, hyper-heat solutions are reversible systems, which means they can heat or cool your room depending on your desired mode of operation.

How does Mitsubishi hyper-heat work?

Mitsubishi’s hyper-heating H2i® compressor motor signals that a burst of heat is needed when the temperature gets below 40°F. Depending on the temperature, the motor revs up accordingly and the system absorbs the additional heat thrown off the compressor magnets.

Are Mitsubishi Heatpumps good?

Mitsubishi is widely considered to make among the best and most reliable ductless heat pump systems. … The Bottom Line: If you have a flexible budget and are looking for a comprehensive and generally reliable mini-split system for your home, Mitsubishi is an excellent option.

How cold will a Mitsubishi heat pump work?

Enter Hyper Heat Technology for Advanced Efficiency In the coldest weather, Mitsubishi Electric heat pumps can continue delivering reliable heat when temperatures are as cold as -13° F!

How much does a Mitsubishi heat pump cost?

How much does a Mitsubishi heat pump cost? Mitsubishi heat pumps range in price from $1,405 to $3,390 for the unit only. With installation, costs can reach $3,500 to $5,890.

What is Hspf rating?

Heating Seasonal Performance Factor (HSPF) is a heating efficiency rating for heat pumps. The higher the rating, the more efficient the heat pump. A more efficient heat pump will result in less energy use and increased energy savings over the life of the system, compared to a less efficient heat pump.

Can a mini split heat a whole house?

A mini-split, when placed properly and when maintained well can heat and entire home and can do so efficiently to help save on your energy bill. On top of the size of the unit, you also need to keep efficiency in mind. These units are designed to be energy efficient and to deliver maximum punch with minimal effort.

How much is a Mitsubishi mini split?

On the average, the cheapest Mitsubishi ductless mini split unit costs around more than a thousand bucks, although you can still find some Mitsubishi ductless mini split series in which the models have a price range that is around $500 or more. Those with the highest Btu may range around $5,500 up to $5,900.

Article first time published on

How cold will a mini split work?

Mid-level mini splits run at 100 percent efficiency down to 20°F and typically require a base pan heater. These work well for heating moderate to cold climates. Economy-level mini splits run at 100 percent efficiency down to 30°F and may shut off at temperatures below 20°F.

How efficient is Mitsubishi hyper heat?

The Mitsubishi Hyper Heat system will work at 100% efficiency down to 0 degrees Fahrenheit, and from there to -13 degrees Fahrenheit it will work at 76% efficiency. This means that you will keep and maintain your current heat source for those few times a year our outdoor temperature dips below -13.

Does wind chill affect heat pump?

Wind chill does not affect a heat pump’s performance. You only need to consider the “real” temperature — not the “feels like” measure they give you to account for wind chill. As long as the actual temperature stays in range, your model will still do the job.

How long do Mitsubishi heat pumps last?

Heat pumps: Heat pumps last for an average of 15 years, though more advanced options like Mitsubishi Electric heat pumps and Mitsubishi Electric mini splits can last longer with proper maintenance.

What is a Mitsubishi Diamond contractor?

The company’s premier-level installers are called Mitsubishi Diamond Contractors. These dealers are chosen based on their tremendous skill and excellent customer service ratings. Residents of Bellefonte, PA can expect the highest level of service and product support for ductless AC units from these contractors.

Why Mitsubishi AC is expensive?

One reason for that is that their market presence is less in India. Being an imported brand, their products are quite expensive, which makes it hard for them to penetrate the market. And with less penetration, their service network is also not as large as many of the big air conditioner brands.

Why is my heat pump bill so high?

Ruling these things out, however, usually leaves just one culprit – the heating system, especially if it is an older heat pump. Your electric bill will naturally be higher in the coldest months of the year. This is because your older heat pump needs help keeping your home as warm as you would like it to be.

How much electricity does a heat pump use?

Consider that a typical heat pump system uses 3kW – 6kW while running, daily consumption in cold days can easily be 30–60kWh or more. This is why home insulation and air-tightness is such an important way of conserving energy.

Which heat pump brand is best?

• Lennox. Lennox offers one of the most precise and efficient heat pumps you can buy. …
• Trane. Trane offers high-quality heat pumps that will save you money. …
• Carrier. This brand is known for its environmentally friendly heat pumps. …
• Rheem. …
• Goodman. …
• Ruud. …
• Bryant. …
• American Standard.

Do heat pumps work below 20 degrees?

Do heat pumps work below 20 degrees? Yes, air source heat pumps work below 20—in fact, they perform well below -10! If you’re worried—or if you live in Antarctica—you can get a heat pump with a supplemental heating system in case of emergencies (the vast majority of people never need it).

Can it be too hot for a heat pump to work?

If your system is not cooling correctly, the heat pump can run all day trying unsuccessfully to reach the 70-degree temperature. Your heat pump temperature shouldn’t be any higher than 80 degrees Fahrenheit (27 degrees Celsius) during the summer.

What is Mitsubishi inverter?

Mitsubishi Electric’s INVERTER Technology. … Part of the ductless compressor unit, INVERTER technology selectively changes the motor speed according to home temperature demands. This variable compression speed means a smoother, more streamlined approach to temperature delivery that’s also lighter on the pocketbook.

Should I leave my Mitsubishi mini split on all the time?

A mini-split system uses less energy and keeps temperatures most consistent when it runs continuously, as in, 24/7. You also don’t need to turn the units on and off or adjust temperature settings when you’re away like you might with a central heating and cooling system controlled with a thermostat. Set the fan to AUTO.

Is a mini split A Good Idea?

Mini-split systems are a good investment for many commercial structures as well. They allow spot heating and cooling that operates independently of a central system, allowing efficient, economical control for only those occupied areas.

Can I install a mini split myself?

It is possible to install the air handler and condenser unit on your own and bring in a professional to complete the refrigerant line setup. DIY mini splits come with the refrigerant line already charged and do not require a professional to charge them.

Is 8.5 HSPF good?

8.5 HSPF is a good HSPF rating (earns an ENERGY STAR label). There are heat pumps with 10 HSPF, or even higher.

Is HSPF the same as EER?

Energy Efficiency Ratio (EER) is a measure of how efficiently a cooling system will operate when the outdoor temperature is at a specific level (95 degrees F). … Heat Seasonal Performance Factor (HSPF) is the most commonly used measure of a heat pumps heating efficiency.

What is SEER and HSPF?

The Seasonal Energy Efficiency Ratio (SEER) measures cooling efficiency over the cooling season, while the Heating Seasonal Performance Factor (HSPF) measures heating efficiency over the heating season.

How long do mini split systems last?

Ductless mini-splits – Like heat pumps, ductless mini-splits can provide both heating and cooling, with a typical life span of 10 to 30 years, except in coastal areas.

Does a mini split dehumidify?

Mini-split systems are capable of drying some of the added moisture during warmer months. Unfortunately, they are not designed to dehumidify in cold weather and will not pull moisture in the winter months. Dehumidification should run independently of cooling systems to ensure proper moisture removal.

Are mini splits good for heating?

Mini-split systems are great for both heating and cooling your home. … In fact, these electric, high-efficiency, heat-pump systems are designed to heat and cool your living spaces to within a half of a degree and use up to 40 percent less energy than traditional heating and cooling methods.