CONTROL. ARMS. Fabtech’s Uniball Upper Control Arms provide increased strength to the front suspension by replacing the stock ball joint upper arms that can become worn and eventually fail under aggressive offroad use. These heavy duty upper arms are designed for longevity in rugged offroad conditions.

What is a uniball joint?

Suspension Component OEM ball joints are typically used in pivoting suspension assemblies such as A-arms. … Uniballs are favored for severe stress conditions over ball joints because of their superior strength and durability. They will simply last longer and hold up to severe use better.

What are the types of control arms?

• Control arm type suspension.
• Strut type suspension.

What is a control arm and what does it do?

The control arms are one of the core components of a suspension system and serve as the direct connection points between the front wheel assemblies and the vehicle’s frame. The control arms allow a driver to steer a car while also guiding the wheels up and down with the road surface.

How do you replace uniball with Delta joint?

1. Remove Upper Control Arms. …
2. Remove Lower Uniball Clips/ Snap Rings. …
3. Remove Uniball from Upper Control Arms (UCA) …
4. Cleaning Upper Control Arms (UCA) …
5. Press in Delta Joints with Delta Joint Tool Kit. …
6. Re-install the New Clip/ Snap Ring on Delta Joints.

What are the signs of bad control arms?

• #1) Clunking Noise. One of the first things you’ll notice when one or more of your vehicle’s control arms goes bad is a clunking noise. …
• #2) Vehicle Pulling to the Side. …
• #3) Uneven Tread Wear. …
• #4) Vibrations When Driving. …
• #5) Visual Damage.

What are Delta joints?

The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball.

Should I replace both upper and lower control arms?

It is not necessary to replace both lower or both upper control arms if one is bad, but often they wear out at roughly the same mileage. If one control arm is bad and the other is on its way, it makes sense to replace both arms at once. This way, you only need to do the wheel alignment once.

Can you drive with a bad control arm?

It is not safe to drive with a bad control arm because when the control arm or the bushings are worn out or broken off, steering will become unpredictable and dangerous for you and the other drivers. Your vehicle can pull to one side randomly even though you are keeping the steering wheel straight.”

What are the 2 types of control arms?

The number of control arms on a single wheel varies depending on the type of vehicle. Some have two control arms on either side- an upper and lower one. These can be seen attached to the wheel assembly through ball joints while the other ends bolt to the vehicle frame.

Article first time published on

Is an A arm the same as a control arm?

In automotive suspension, a control arm, also known as an A-arm, is a hinged suspension link between the chassis and the suspension upright or hub that carries the wheel. … Most control arms form the lower link of a suspension. A few designs use them as the upper link, usually with a lower wishbone.

What is PTFE lubricant used for?

PTFE lubricant is used for coating items such as cookware in PTFE. The process involves using a primer coat and a topcoat. PTFE lubricant is designed for application to areas that require low-friction, corrosion resistance, or dry lubrication.

Should you lubricate Heim joints?

Quality heim joints are maintenance free and self lubricating. You never want to oil/lube/grease them, as that attracts dirt and will cause premature failure of the seals.

How long can you drive on lower control arm?

With the damaged or worn-out control arm, you can drive your vehicle for a week or less but it should be repaired as soon as you detect the problem through the methods given above before the suspension gets broken.

Do control arms need to be replaced?

Over time, the control arm assembly can become worn or bent. These assemblies normally wear out between 90,000 and 100,000 miles. They can wear out faster if you go over a large pothole or are involved in a car accident. Various parts of the assembly may wear out as well, such as the bushings or ball joints.

Do you need alignment after replacing control arms?

An alignment after replacing the lower control arm is absolutely required.

How much should it cost to replace control arms?

If just a single control arm needs replacing, it will typically cost between $50 and $100. If the damage is to the whole system, you would need to purchase a control arm kit for around $100 to $250 . Ask a certified auto mechanic for an accurate assessment of the problem and the full cost including labor.

What would happens if control arm breaks while driving?

Having damaged control arms and worn bushings or ball joints could cause suspension parts to become misaligned. When this occurs, you may experience issues with steering and handling. Usually you’ll notice noises first, either while turning, stopping or driving over speed bumps.

Are tubular control arms worth it?

Lastly, tubular control arms look great! They are welded and powder coated, and they let people know you have a performance handling ride! While stock arms are bulky stamped steel and not very appealing, QA1 tubular control arms will make your suspension look as good as the rest of your car!

Do control arms come with bushings?

A control arm connects the wheel hub and steering knuckle to the frame of the vehicle. They are typically equipped with bushings on the frame side of the vehicle and a ball joint on the wheel side of the vehicle that allow flex and controlled movement according to road conditions and steering input from the driver.

Do upper control arms make a difference?

The most common reason to replace a control arm is to improve wheel travel as part of a suspension lift. However, a new control arm can offer more than just increased ride height (lift) and additional wheel travel: Increased durability in the arm itself. A wider range of uniball/ball joint options.

What is a transverse arm?

The transverse control arm is an important part of the suspension system because it helps to stabilize and position the wheels/tires. Without the transverse control arm, the vehicle cannot be steered because neither the functionality nor stability of the axle are ensured.

What are control arm bushes?

Control arms are what hold the wheels of the car in place and help dictate the steering movement of the vehicle. The bushings are what connect the control arms to the frame of the vehicle and help the wheels stay on the road through rough terrain.

What tools do you need to change a control arm?

Need to replace control arms? The control arms can come in two types: one has 2 bolts through the pivot bushings, and the other has 4 bolts through the sub-frame. The 2-bolt type is quite easy to do and standard tools (metric sockets, hammer, pry bar and torque wrench) are all you need.

Are Ram 1500 control arms plastic?

The OEM front upper control arms for 2019+ RAM 1500 (5th generation) are characterized by a non-greaseable plastic “liner” type bearing and composite two-step process. This hybrid design involves bonding a type of plastic to a thin layer of hollow stamped steel across the entire control arm body.