The Fine-Point blade comes stock with the Explore Air 2 and Cricut Maker machines. The blade housing is available either gold or silver in color (both are the same). This blade was previously called the Premium German Carbide blade and is the standard blade to use with your machine.

How do I know what Blade is in my Cricut?

You can easily identify this blade in retail locations by the red or white protective cap. The blade housing that ships with the Explore machines was designed to house the Premium Fine-Point blades. The Cricut Explore Deep Point blade has a steeper blade angle (60 degrees vs. 45) and harder, more durable steel.

Can you use the knife blade on Cricut explore AIR 2?

Can I use Knife Blade with my Cricut Explore machine? Knife blade is compatible with Cricut Maker machines only. It is operated by a drive mechanism that Cricut Explore models do not have, and with which they cannot be upgraded.

What blade does Cricut maker come with?

For Papercrafters: The Cricut Maker comes with the fine point blade and housing, which is what you’ll typically use for your blade. You may also want to consider the Scoring Wheel and/or the Debossing Tip. Papercrafts are usually made with the green Standard Grip Mat or the blue Light Grip mat.

How do I know when my Cricut needs a new blade?

Cricut machines blades need to be changed at different intervals based on the materials you use with your machine. In general, when the cuts are not crisp, then it is time to change your blade.

Are all Cricut blades the same?

Are Cricut Blades Interchangeable? The Fine Point blade and the Bonded Fabric blade can use the same housing. Also, the QuickSwap tools can use the same housing, so if you already own one, from now on, you only need to get the tip or blade.

What blades come with the Cricut Maker 2?

• Rotary Blade + Drive Housing.
• Premium Fine-Point Blade + Housing (comes pre-installed in the B clamp).

Can you use the rotary blade with Cricut explore AIR 2?

Please note that the Rotary Blade is only for use with the Cricut Maker – it cannot be used with the Explore, Explore One, Explore Air, Explore Air 2, or any older machines.

Does the Cricut Maker come with the rotary blade?

The Cricut Maker comes with a Rotary Blade and housing. The housing is calibrated specifically for your machine. … Open the Adaptive T ool System B clamp and place the Rotary Blade inside aligning the gears together.

Can the Cricut Air 2 engrave?

You can engrave whatever you want on these ornaments, just as long as you can put the text into Design Space. First, you’ll want to get your names into Cricut Design Space. If you’re using your Explore, I would suggest a skinny font. … With the cut, your project will look better with a skinny font.

Article first time published on

How long will a Cricut blade last?

When asked, “How long do Cricut blades last?”, we think for a guideline you could start with, that at a minimum, you should change your blade every two months with average use of your Cricut machine. If you’re cutting with it quite often, you might need to move that up to every six weeks.

How often should I sharpen my Cricut blade?

Do some test cuts with both paper and vinyl. If the blade is not sharp enough, repeat the process. I find that the first few times you use this method you will need to sharpen the blade twice but once you are in maintenance mode once will suffice. Make a plan to sharpen your blade after each day you use your blades.

Do Cricut blades get dull?

Over time, the blades will wear down, becoming dull and cutting inconsistently. Replacing Cricut blades every few months can get expensive, so learning to sharpen the blades will allow you to extend the life of the blades and lessen the frequency for purchasing new ones.

What is the 30 degree blade used for?

A blade with a 30-degree angle is only capable of making shallow cuts. This blade can only handle film up to 2 millimeters in thickness. However, it is also the only blade that can cut less than 2-millimeter films, so you will need it if you are planning on using these thin films.

Does the Cricut maker come with a knife blade?

Cricut Maker Series Note: Knife Blade, Rotary Blade, QuickSwap Tools, machine mats, and other accessories sold separately. Premium Fine-Point Blade + Blade Housing (pre-installed in the B clamp).

What blade do you use for vinyl?

Material TypeBest BladesRegular Cardstock (65 lb. to 110 lb.) and papersFine Point Blade (the standard blade)Vinyl (any type)Fine Point Blade (the standard blade)Very thick cardstock and things like Kraft boardDeep Point Blade (Explore) or Knife Blade (Maker)

What blade comes with the Cricut maker 3?

It comes with Fine-Point Blade installed, so right out of the box, you’ll be ready to cut. Check out the full list of compatible tools here, sold separately.

Can the rotary blade cut vinyl?

The blade is designed like a quilting rotary blade and is designed to cut woven materials like fabric. You can cut loads of things, but it was primarily designed to cut fabric. So far I have cut quilting cotton, denim, faux leather (vinyl), felt & canvas.

What Cricut blade cuts wood?

The Cricut Knife Blade is a tool you can use with your Cricut Maker that cuts through thicker and denser materials such as balsa wood, leather, matboard, and Cricut Chipboard easily. You can buy it complete with the Drive Housing here.

Does Cricut Air 2 cut acrylic?

The Knife Blade for the Maker is the recommended way to cut acrylic, the deep cut blade on the Air 2 will also cut acrylic but you will need to make sure the thickness of your acrylic is 1 mm or less. … You will likely want to engrave your acrylic piece before you cut it into a shape.

Does the Cricut blade go in a certain way?

All Cricut blades are a universal shape that fit into the housing the came with your machine, so you don’t have to worry about whether the blade will go in your housing.

Which is the fine point blade for Cricut?

The Premium Fine-Point Blade (formerly known as the German Carbide Premium Blade) can be used with the Maker, Explore, Explore One, Explore Air, and Explore Air 2 machines. Use it with the Premium Fine-Point Blade Housing.

What is the thickest material a Cricut Explore Air 2 can cut?

For machines in the Explore series, the thickest materials the devices can cut are 2 mm. The Cricut materials list for the Explore series includes the following: Paper, including cardstock, poster board, glitter paper, photo paper, cardboard and sticker paper.

Can Cricut Explore Air 2 use infusible ink?

Infusible Ink is compatible with Cricut Maker, Cricut Explore, and Cricut Joy machines, as well as Cricut EasyPress 2 and Cricut EasyPress.

Can the Cricut Explore Air 2 cut metal?

You may not even know that your machine can cut metal but it can! Both the Cricut Explore series and the Cricut Maker can cut thin metal for all sorts of project ideas.

How do I make my Cricut mat sticky again?

Run lukewarm water over the mat. Use a plastic, hard-bristled brush to gently scrub in a circular motion until the entire surface of the mat had been cleaned. Pat dry with a paper towel. Let mat air dry completely for stickiness to return.

How often should you replace fine point blade Cricut?

In general, 3-6 months is the average useful life of a Premium Fine Point blade in a Cricut Maker machine.

Can you cut aluminum foil with Cricut?

Cutting Adhesive Foil with a Cricut Machine Place Adhesive Foil (liner side down) onto Cricut StandardGrip cutting mat. Select images and size, and load the mat into the machine. Refer to Custom Cut Guide table below to adjust machine settings. Press CUT.

How long does a Cricut blade last cutting vinyl?

A Cricut premium fine point blade should last 12-18 months. Daily use and cutting heavy materials will dull your blade sooner. Paper and cardstock tend to dull your blade faster than vinyl. When your blade stops cutting well, even after cleaning and adjusting settings, it’s time to replace it.

Is the Cricut Air 2 worth it?

Is Cricut Explore AIR 2 worth it? Yes, the Cricut Explore AIR 2 is a great cutter for beginners. It’s fast and fairly easy to use. They use carbide premium blade which means that they will last a long time it’s one of the few vinyl cutter machines that do it.

Can Cricut fine point blade cut fabric?

The Bonded Fabric Blade isn’t a rotary blade (see the Cricut Maker section for that) but it is able to cut bonded fabric. These blades are pink which makes them easy to identify. The blades can also be used in the Fine Point Blade housing.