Thinset is going to create a solid surface under tile and prevent flexing that could lead to cracking. Using thinset between the backerboard and subfloor will create additional strength, fill in any potential gaps that exist and lessen the possibility of movement.

Can you use thinset under cement board?

Embed the cement board in latex-modified thin-set mortar The main reason for using thin-set between the cement board and the subfloor isn’t as much for bonding as it is for even, void-free cement board support throughout the floor. … Then spread thinset mortar with the flat side of a 1/4-in.

Can I just screw down cement board?

Screw and Joints Do not use drywall screws as they are not recommended to be used to hold the backer board in place. All of your backer board pieces should be cut before they are placed on​ the floor. … It is important to highlight that screws shall not be installed all the way down to the floor joists.

What thinset do I use under Hardibacker?

Latex or acrylic modified thinset (complying with ANSI A118. 4). Dry-set mortar for use between subfloor and cement board only (complying with ANSI A118.

Should I use thinset or mortar?

Thinset is appropriate for wall tiles as well as flooring in high-traffic, moisture-varying and temperature-varying areas, such as bathrooms and kitchens. … Medium-strength mortar, or type-N mortar, is an all-purpose mortar for exterior or interior load-bearing walls as long as they are above grade.

What goes under Backerboard?

For flooring, the backer board should be installed over a 5/8-inch thick OSB or plywood base. For countertops, use 3/4-inch plywood beneath the backer board. And for walls and ceilings, apply 1/2-inch or 5/8-inch backer board screwed directly to the wall studs or joists.

What type of thinset do I use on cement board?

Powered cutting tools are not advisable for cutting cementitious backer board, as they produce fine-particle cement dust. Mix dry, polymer-modified thinset mortar with water in a bucket, using the mixing instructions provided on the thinset bag. Blend the mixture with a paint stir stick.

Does thinset stick to Hardie board?

MongoCT. An unmodified thinset (Masterblend) is fine between the Hardi and the subfloor. The reason for the layer of thinset between the cement board and the subfloor is to fill the voids/gaps between the two. It’ll keep the cement board from moving up and down.

What happens if you don't put thinset under Hardibacker?

It will make an enormous mess under the house (or whatever is under your bathroom). It is also more likely to make the floor uneven since it is hard to level thinset that is separated by gaps. The installation manual for HardieBacker suggests to embed it in thin-set and it should be installed over plywood.

How long does it take for thinset to dry under Hardibacker?

Allow Mortar to Set Although it’s tempting to start tiling the floor, let the mortar fully set and dry first. Wait 24 to 48 hours before tiling.

Article first time published on

What is thinset mortar used for?

Thinset, while it is also sometimes referred to as a “mortar” is an adhesive. It’s a mix of cement, water, and fine sand. It holds your tile to the substrate and is used in commercial applications, “wet wall” applications (such as a shower floor), or with heavier tiling materials such as Ankara Travertine Stone Tile.

Do I need to seal cement board before tiling?

Contrary to popular thought, tile and grout are not waterproof, and some moisture will penetrate even if sealant is used. … However, if you choose to use concrete backerboard, which is much stronger and more durable than gypsum board, a water vapor membrane must be placed underneath it or a sealant applied on top of it.

How thick can thinset be under tile?

The terms thinset cement, thinset mortar, dryset mortar, and drybond mortar are synonymous. This type of cement is designed to adhere well in a thin layer – typically not greater than 3/16th thick. For example, a 3/8″ notch trowel will produce a 3/16th inch thick coating after the tiles are pressed in to the cement.

Can I use thinset instead of mortar?

Thinset is an adhesive cement used to secure floor and wall tiles to concrete surfaces. The word “thinset” is sometimes used interchangeably with “mortar,” because it’s a type of modified mortar made specifically for tile.

How thick can mortar be under tile?

Most tile installations require a 3/16-inch layer of mortar beneath the tile. A mortar layer 3/16 an inch thick is accomplished by spreading mortar with a 3/8-inch by 3/8-inch square-notched trowel. This thickness is ideal for most tile installations. However, sometimes a thicker layer of mortar is required.

Can I put thinset on plywood?

Thinset is the wet base that you first trowel on the plywood to make the tile stick. Higher latex content is essential for bonding to plywood. A quality unmodified thinset should be used and mixed with a latex additive.

Can you tile straight onto backer board?

As a building material, interior fibre cement tile backer board products are especially suited as a tiling base for tiling wet areas such as bathrooms, kitchens and showers as it is resistant to permanent water damage and does not need to be treated before tiling.

Can you walk on backer board?

As you lay each sheet have at least 2 screws in it before you step on it, other than that Yes you can walk on it the rest of the nite.

Is tile underlayment necessary?

Some people usually ask themselves if porcelain tiles need underlayment, well yes, they do. For your porcelain tile to last for long, you need an underlayment. Both porcelain and ceramic tiles are rigid, so if they are installed on surfaces that are not flat, they can crack easily.

What size notched trowel for Backerboard?

mortar or dry-set mortar mixed with latex additive that is suitable for bonding cement backer board to plywood subfloor, with 1/4″ square-notched trowel for mortar, 5/32″ V-notched trowel for Type 1 organic adhesive. Place cement board with joints staggered from subfloor joints.

How soon can you walk on tile after thinset?

After grouting, you should wait at least another 24 hours before walking on the tile, but a longer period of 48 to 72 hours is preferable. Putting weight on tiles before the mortar, grout and sealant have fully cured can cause the tiles to shift and even break apart.

How long should thinset dry before walking?

With most kinds of thinset, it’s generally advisable to wait at least 48 hours after application before walking on or applying pressure to the tile. Manufacturers often recommend allowing a window of 24 to 48 hours for curing time, and in this case, longer is better.

Can I level a floor with thinset?

You can use thinset to install tile over an uneven cement floor and leave the floor perfectly level. You can also use thinset mortar to level out an uneven cement floor or fill small holes in the floor without installing tile.

How thick should my thinset be?

The terms thinset cement, thinset mortar, dryset mortar, and drybond mortar are synonymous. This type of cement is designed to adhere well in a thin layer – typically not greater than 3/16th thick. For example, a 3/8″ notch trowel will produce a 3/16th inch thick coating after the tiles are pressed in to the cement.

Can you use thinset on wood?

Using Thinset To Stick Tiles To Wood Wall Thinset isn’t the perfect choice for sticking tiles on wood. Firstly, thinset is designed to work with concrete or stone tiles. … You can use glue or mastic to attach tiles and wood. They can even adhere to tiles on wooden surfaces like wooden sub-floor or backsplash.

Can you tile over cement board?

Cement board forms a durable, stable base for tile, and it has no organic materials (unlike drywall, greenboard, or plywood) so it is not prone to mold, rot, shrinkage, or decomposition due to moisture. Ceramic tile laid over cement board is one of the most durable floor or wall surfaces you can install.

Is back buttering tile necessary?

Although not necessary for tile coverage, back buttering can be effective by increasing the bond of the mortar to the back of the tile which is an excellent benefit.

Can thinset be too thick?

A thick layer of thinset, like most adhesives, is apt to flex and crack leading to premature bonding failure. In addition to producing an uneven surface, applying too much thinset can create costly cleanup headaches and add unnecessary time to a project.

Can you grout with thinset?

Thinset mortar, commonly used for securing stone to a surface becomes very hard just as a Portland cement grout becomes as it dries. Although the intended use for thinset is not for mortar joints. You can use it on backsplashes and other surfaces that will not see heavy traffic.

Is thinset mortar waterproof?

Thinset is designed to adhere well in a thin layer that’s typically not greater than 3/16″ thick. … Although thin-set is not waterproof, it is isn’t water soluble. When moisture is present, it will not return to a liquefied state as mastic would.

Can grout be used as mortar?

Yes you can do it, is simple answer, if what you have is sanded grout. If you can add a little acrylic glue available in 4oz tubes at building material centers for a couple of dollars it will be even better. Alternatively you may be able to ask to take a torn bag of ThinSet for free, such as I have done.