Villaboard™ lining is an ideal internal lining for bathrooms, laundries, kitchens and high traffic abuse areas. It is not suitable as an external wall cladding.

Is Villaboard waterproof?

Villaboard™ is a heavy-duty wall lining compared to plasterboard. Ideal for use in bathrooms and wet areas, if the waterproofing fails you can rest assure that Villaboard won’t. … Use it on walls and ceilings in bathrooms, laundries, kitchens and high-traffic areas, and even in multi-residential and commercial buildings.

What is Villaboard lining used for?

Villaboard is an internal wall and ceiling lining designed specially for bathrooms, laundries, kitchens and high-traffic areas in residential, medium-density and commercial buildings. It can be used on either timber or light gauge steel framed buildings.

What's the difference between Blueboard and Villaboard?

Blue board is designed for external use. Villa board which is a similarly product is used for internal use. It is usually green color. This is the best product for bathrooms.

Do you need to seal Villaboard before tiling?

The cut edges of Villaboard sheets do not need to be sealed – they are completely immune to permamanet water damage. Thoroughly clean all surface dust from lining sheets with a damp cloth before applying tile adhesive to ensure maximum bond.

Can you use screws in Villaboard?

According to both gyprock and villaboard, any tiled and/or wet area should only be fastened with screws.

Is Villaboard fibre a cement?

Villaboard is a smooth, sanded flat fibre cement sheet with recesses on the long edges for flush jointing and a seamless finish. It can be painted, wallpapered or tiled.

Can you use Villaboard tile underlay?

James HardieTM ceramic tile underlay suited only as a substrate for tiles on timber floors. For tiling of walls use Villaboard® lining.

Can you paint Villaboard?

2Apply a second coat of compound to finish of the villaboard joint. … If you plan to paint the surface, apply a third, slightly wider coat of compound first. To finish off, fill in any nail holes with a small amount of compound.

Can Villaboard be used for ceilings?

Villaboard is seamless flat, internal wall or ceiling lining that can be painted, wallpapered or partly/fully tiled.

Article first time published on

Is Hardiflex a cement board?

HardieFlex® Fiber Cement Board 4.5mm is the best ceiling solution for internal residential applications greater than 6sqm, and as a standard solution for internal walls exposed to low traffic. It is fire-resistant and deemed to be non-combustible.

Can Villaboard be used on the floor?

Villaboard is actually a wall lining, not to be used for the floor.

Do I prime waterproofing before tiling?

Yes, with the exception of substrates covered with a waterproofing membrane due to its non-absorbent nature. We recommend the use of a primer on all other substrates to be tiled. By not using a primer, you can void your product and tiling system warranties.

Is Blueboard waterproof?

Blue Board cement sheets are mainly used for exterior use as they are waterproof. They are never kept as a finish product as blue board sheets must be rendered in order for it to be useful.

Is Villaboard flammable?

Villaboard is deemed non-combustible and can be used in fire and acoustic wall systems. It is more impact resistant than plasterboard making it suitable for high traffic commercial applications.

Is Villaboard termite resistant?

When installed and maintained correctly, villaboard is resistant to damage from moisture, rot, termites and fire. Thanks to it’s high impact resistance lining, it’s also been a popular choice for high traffic areas in an effort to reduce the lumps and bumps of life.

What is the difference between plasterboard and cement board?

Fiber cement boards are far more durable and impact-resistant than gypsum board. However, Fiber cement boards are far heavier than gypsum board. … Fiber cement boards are available in two types: water-resistant and waterproof. For gypsum board, only do water-resistant by moisture resistant paper(the green-colored one ).

Can you nail Villaboard?

Full-sized villaboard panels are quite heavy. To make it easier to hold the higher ones on the wall before you install them, you can make a nail ledge support. Hammer nails halfway into the joist about 10mm below the horizontal join line you marked out in Step 2.

Can you use Liquid Nails on Villaboard?

What adhesive do I use to glue villa board to hebel blocks and timber stud walls. We recommend the use of our Liquid Nails Original or Liquid Nails Heavy Duty for this application. You may still need to consider the use of mechanical fasteners to ensure a structural sound bond.

What nails do you use on Villaboard?

Galvanised fibre cement nails For 6 & 9mm Villaboard™ lining use 30mm x 2.8 Galvanised fibre cement nails For 12mm Villaboard™ lining use 40mm x 2.8mm fibre cement nails.

Can you use cement sheeting outside?

When used on the exterior of a home it is often found used as eave linings, fascias and barge boards, however it can also be used to cover the exterior of buildings in either sheet form “fibro” or as “hardie board planks”.

What is Fibre cement sheeting?

Definition. Fibre cement is a composite building material made of sand, cement and cellulose fibres. … Fibre cement sheeting can be used to cover the exterior of a house and can also be used as a substitute for timber fascias and barge boards in high fire danger areas.

What kind of paint do you use on cement sheets?

DULUX WEATHERSHIELD® Low Sheen provides long lasting exterior decoration and protection for various substrates including Fibre Cement Sheeting.

What is the difference between tile underlay and Villaboard?

Villaboard is impact & water resistant. Drill it and you’ll find out. Tile underlay is not water resistant, you cannot use it to sheet a wall in a wet area, but you could otherwise if you are happy with the texture.

How do you waterproof tile underlay?

1. 1Clean the floor. Before you start waterproofing it’s important that the floor is clean. …
2. 2Apply the primer. …
3. 3Silicone the gaps. …
4. 4Apply masking tape to the wall. …
5. 5Apply the waterproofing agent. …
6. 6Apply the waterproof membrane to joints. …
7. 7Waterproof the whole floor. …
8. 8Apply the last coat of waterproofing agent.

How thick should cement board be under tile?

Floors: A 1/4-inch minimum thickness is needed, but thicker panels are also fine. Walls: Use 1/2-inch or 5/8-inch-thick cement board, not 1/4-inch. The extra thickness is needed when spanning the studs and it provides a solid base for the tile.

Can I tile directly onto bricks?

First things first, yes, you can tile over a brick wall. However, as you may have guessed it’s not that simple as tiling over a brick wall is tricky and can result in an uneven finish. … Plus, removing tiles that have been directly applied to brick can be a painful job.

Can you put plasterboard straight onto brick?

Yes, you can laminate’ plasterboard (called sheryrich in the USA), directly onto a brick wall surface using many types of construction glues such as Liquid Nails. However, the final wall will only be as ‘straight’ and plumb as the brick wall.

Can you plaster straight onto brick?

Plastering directly to bare brickwork or blocks, known as ‘wet plastering‘, is still favoured by some for its superior soundproofing. A cement render or gypsum backing (known as a scratch coat) is first trowelled directly onto blockwork before this is finished with a thin skim coat.

Can I use HardiFlex for exterior wall?

HardieFlex® Senepa is used as backing for roof gutters and to enhance roof designs. HardieFlex® Eaves are used with an extension of the roof over the side of the house. HardiePlank® Siding adds protection and design value to a home. It can be used both externally and internally as design accent to a home.

Can HardiFlex be painted?

The most economical type of paint recommended for HardieFlex fiber cement boards are water-based (latex) paints. Acrylic, vinyl, and PVA are all water-based paints as well. … Oil-based (alkyds or enamel) paints can also be used on HardieFlex fiber cement boards, although they would cost more than water-based.