However, to keep your fiber cement siding looking and working its best, it’s essential to repaint it every 10 years or so and performing basic repairs to cracks or splits in the fiber cement and caulking regularly.

How long does paint last on cement board?

Standard Repainting If properly painted, fiber cement siding may hold its new finish between 7 to 15 years. Unless extenuating circumstances hasten the rate of deterioration, you can expect an attractive finish that should retain its beauty for approximately a decade.

Does cement board have to be painted?

One of the most common myths around fiber cement siding is that it doesn’t need to be painted. … But painting fiber cement siding might become necessary since most paint has a lifespan of 10 to 15 years, while fiber cement has a lifespan of up to 50 years.

How often does Hardie board need repainting?

Hardie Plank is also called fiber cement siding. While it’s far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance. It is one of the best materials and long-term solutions for protecting your home.

How long does pre painted Hardie board last?

(The industry refers to this process as blow and go) And, the average paint life with that process is typically 6 to 8 years if the prep and application is performed correctly.

How often should fiber cement siding be painted?

If you purchase prefinished fiber cement siding, you don’t need to worry about painting it when it’s time to install. Unfinished styles on the other hand should be painted shortly after installation. For both types, a new paint job can be done every 10 to 15 years.

How long should Hardie board last?

With the proper care, your James Hardie fiber cement siding will outlast its 30-year warranty. It can even last up to 50 years if cared for properly.

Do you paint or stain Hardie board?

Hardiplank siding is a long-lasting, fireproof building material that resembles natural wood. Because it is a concrete-based product, it cannot be stained in the traditional sense.

Can you pressure wash HardiPlank?

The manufacturer recommends that you do not pressure wash your Hardie siding. The hard spray of water from the power washer can damage the surface of the siding. In fact, pressure washing fiber cement siding is one of the only ways you can damage this durable type of siding.

Should you paint the backside of Hardie board siding?

All sides of the Hardie Board are painted (even the edges) and therefore the entire board is completely sealed. (Although Hardie Board comes from the factory without the back of the board primed, according to James Hardie’s support department, they say you can prime and paint the entire board.)

Article first time published on

Should Hardie board be painted?

Painting Hardie board siding will significantly improve its look and its longevity. Siding finishes generally last for around 15 years, so you need to do it, and do it right. Painting, when done properly can really bring out the wood feel of the Hardie board.

Do you have to Prime cement board?

You do not need to prime cement boards unless they are routinely exposed to harsh weather conditions. If you do choose to prime your cement board, use an exterior acrylic latex bonding primer.

Does Hardie board come painted?

Painting: Hardie board siding is known to retain paint longer than wood. Because it is moisture-resistant, it never swells or rots so the paint never peels, chips or cracks. … It also comes in a variety of pre-painted colors from which to choose, allowing you to select the proper shade without lifting a finger.

Do you have to Prime Hardie plank?

Whether you’ve got a ColorPlus finish or custom paint on your existing Hardie siding, you don’t have to use primer when re-painting Hardie. All you should have to do is rinse your siding (use a garden hose – no pressure washers here!) to clean off any dust or dirt.

What is the longest lasting house siding?

Vinyl Siding: 60+ years (warranties last between 20-40 years) Fiber Cement Siding: 50+ years. Stucco Siding: 50-80 years, depending on how it is backed. Metal Siding: Up to 40 years.

Is hardiplank expensive?

You can expect it to be more expensive than vinyl siding, but it’s cheaper to use than brick or stucco and about the same price as other composite sidings. On average, Hardie board siding costs $10 per square foot — so, for example, a 1,200-square-foot exterior wall would cost around $12,000 to install.

How often do you replace hardiplank?

Normal siding needs to be repainted once every 5 to 7 years, but James Hardie siding is made from fiber cement and doesn’t need to be repainted quite so often– a paint cycle can last as long as 12 years, and the paint prefinished James Hardy siding is warranted for 15 years.

Does Hardie board need waterproofing?

Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.

Does Hardie board soak up water?

Hardie siding does a great job of wicking moisture when it is installed on the wall, but when it’s uncovered and flat on the ground it will absorb water. … Luckily, it takes lots of water to saturate Hardie products! It’s no problem for a contractor to install James Hardie products in light rain.

Can you pressure wash cement board siding?

Do not use a high-pressure hose to clean fiber cement siding. This is one of the few ways that you can damage it. If you feel that you need to use a pressure washer, especially on harder to reach locations, only use it at a low pressure — under 1500 psi — with a wide tip.

Is Hardie board better than vinyl?

Alternatively, hardie board is denser (usually more than a quarter of an inch thick), just like real wood siding, which makes it much more durable than vinyl. Since it is composed of cement-like materials and wood fibers, it is stronger than vinyl and much less susceptible to wind and weather damage.

How often do you have to paint board and batten?

Wood siding needs to be sealed with either paint, stain, or a sealer. Here’s the difference: Paint. Needs to be done about every five years, or as soon as you see it deteriorate.

Does mold grow on Hardie board?

It is highly susceptible to mold and mildew. Hardie Plank has many seams and the seams must be sealed or water can infiltrate behind the siding. It can crack and if it does, you must tear the whole wall down in order to replace just one plank. … It is mold and mildew resistant.

Who invented Hardie board?

In the mid 1980s, the siding manufacturing company James Hardie pioneered its development. As the industry leader for decades, James Hardie and Hardie board have pretty much become a synonym for fiber cement siding.

How much does it cost to paint hardiplank?

Type Of SidingAverage Cost to Paint 1,500 sq.ft.Cost Per Square FootConcrete$1,500 – $5,250$1 – $3.50

Can you use a roller to paint Hardie board?

A good quality roller will help you apply in even, smooth strokes, covering as much space as possible at one time. Just don’t hurry this process; it’s best to go slow. Painting is an art! When applying paint to your fiber cement siding, don’t make the mistake of putting too much paint on your brush.

What kind of paint do you use on Hardiflex?

Answer. The most economical type of paint recommended for HardieFlex fiber cement boards are water-based (latex) paints. Acrylic, vinyl, and PVA are all water-based paints as well. Acrylic can be used for both external and internal applications.

Should you caulk Hardie siding?

James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank® siding with ColorPlus® technology. James Hardie also DOES NOT recommend applying caulk to the horizontal overlap between siding planks (see Figure 2).

Does caulking Hardie board void the warranty?

These such areas are called “field butt joints.” In the case of James Hardie’s Color Plus siding, which has a pro-rated 15-year warranty, using caulk at field butt joints will flat out void your warranty!

Do you need to prime new Hardie board?

According to the James Hardie Website, the pre-primed version needs to be painted within 180 days. I’m assuming that, after that, it needs to be washed down and re-primed. To avoid having to worry about it, we apply one coat before the siding is installed, but it doesn’t sound like that’s an option for you.

How long does Fibre cement cladding last?

Fibre-cement cladding costs You can expect a typical lifespan of at least 40 years (Building Research Establishment tests show fibre-cement slates can last for 60+ years).