Depending on the choice of stone and the depth of the stone and gravel base, a stone driveway will cost about $2 to $4 per square foot, installed, due to the slightly higher cost of the materials themselves. You can keep costs to a minimum by doing much of the work yourself.

Is a stone driveway cheaper than asphalt?

Homeowners appreciate the sleek appearance of an asphalt-paved driveway at a lower cost than concrete or paver surfaces. Flexible in extreme climate conditions. Asphalt driveways typically cost $2 – $5 per sq foot to install – more than gravel, but much less than many other options.

How much should a gravel driveway cost?

According to the Home Depot, 4 to 6 inches of rock or gravel is needed for a driveway. Convert your estimated rock depth in inches to feet by dividing the number of inches by 12.

Are stone driveways expensive?

Cons: Paving stones are expensive, and installing them is labor intensive, so you’ll have to shell out a good chunk of cash to use this driveway material. … When installing, consider using sand or small rocks between stones, rather than a cement-based filler.

Is a gravel driveway cheaper than concrete?

Gravel is a whole lot cheaper than concrete, asphalt, or another paved surface. It can cost less than 1/2 of paved driveways.

How long will a gravel driveway last?

With proper care and maintenance, a gravel driveway can last up to 100 years. The beauty of gravel is that it can be repaired and replenished on an ongoing basis. By contrast, wear and damage to asphalt and concrete driveways are difficult to remedy and replacement is often more cost-effective than extensive repairs.

Does a gravel driveway add value?

Gravel is typically the most affordable option but it does not add the value of concrete or asphalt.

What is the least expensive driveway material?

Gravel is typically the least expensive driveway option. Concrete and asphalt both require a gravel base prior to installation, and require that the homeowner purchase enough gravel and additional material to cover the area if such a base is not already in place.

What type of driveway lasts the longest?

Concrete. Concrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.

Which type of driveway is best?

Longevity: The longevity of an asphalt driveway is a lot higher than most other driveway options. Homeowners can expect their asphalt driveway to last at least 20 years. Durability: Asphalt driveways are hard wearing and durable. The seal that is applied on top of your asphalt driveway encourages greater longevity.

Article first time published on

How much does a dump truck load of gravel cost?

Read more about how much is the Dump Truckload of Gravel? The cost range of gravel is mostly between $10 to $50 per ton or $15 to $75 per yard, or $$1 to $3 per square foot or $1350 per dump truckload.

How do you calculate stone for a driveway?

In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

What area will 1 ton of gravel cover?

A ton of gravel will cover approximately 100 square feet, 2 inches deep.

Is crushed stone cheaper than concrete?

Because the process is more efficient and requires less resources, crushed concrete is significantly cheaper than new concrete. Using crushed concrete is a much more environmentally-friendly way to complete your project.

How thick is gravel driveway?

The ideal thickness of each layer is between 4 to 6 inches. The middle layer should also be angular stones about 2” to 3” in diameter such as our #2 Bluestone. Since the material is angular it locks together providing traction and a stable foundation.

How do you harden a gravel driveway?

Use a compacter to compact the gravel driveway and help bind the loose stones into the surface of the driveway. You can rent a manual or powered compacter at most rental yards after you have finished adding a layer of crusher run to the driveway.

Is it better to pave or concrete a driveway?

Concrete is more durable than asphalt. Because it is a less flexible material, it cracks in freezing temperatures, and many people turn to concrete patching products. Concrete offers 50+ years of use. The only maintenance required is occasional degreasing.

Is a paved driveway worth it?

Asphalt driveways can last you 20-25 years if properly installed and maintained – a great investment. … While they increase the value of your home, a nice paved driveway can also help sell your home FASTER.

How do you lay a gravel driveway?

1. Stake out the path of the driveway.
2. Clear grass or topsoil from staked area.
3. Calculate cubic yardage of gravel needed for each driveway layer.
4. Schedule and prepare site for gravel delivery.
5. Level the ground along the path of the driveway.
6. Spread and compact the base layer of gravel.

What type of stone is best for a driveway?

• Crushed Stone #411. It is crushed up #57 stone combined with rock dust. …
• Quarry Process. …
• Pea Gravel. …
• Jersey Shore Gravel. …
• Marble Chips. …
• Blackstar or Blacktrap Rock.

Is gravel more expensive than concrete?

Is a gravel driveway cheaper than a concrete one? A gravel driveway is a more budget-friendly option than paving with concrete, which runs from $4 to $15 per square foot.

Is Rock cheaper than concrete?

Concrete is usually cheaper to purchase and install compared with stone, but it may tally up additional costs over time. Concrete is far more prone to cracking than stone, in fact concrete is guaranteed to show signs of cracks over time. … Still, with proper maintenance and upkeep concrete can last a very long time.

What is a basalt driveway?

Basalt is sometimes used in driveways in the form of crushed rock or pavers. Durable and dense, its dark, rich color provides a strikingly attractive driveway — but it also means that weeds stand out quite sharply against the dark rock.

What is the cheapest driveway stone?

Gravel is one of the cheapest driveway materials. Typically, it’s sold either by the cubic yard (a measure of volume) or by the ton (a measure of weight). The average cubic yard of gravel costs between $40 and $55.

What is the cheapest way to do driveway?

Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you’re installing your driveway on a shoestring budget, gravel is your best choice.

How can I make an inexpensive driveway?

1. Weed-Free Brick Driveway. If you have a shorter driveway, choosing paving bricks might be an option. …
2. The Cheap Driveway. …
3. Tar, Chip, and Pavers Driveway. …
4. Stone with Edging. …
5. The Fancy Concrete Driveway. …
6. Driveway Made of Pavers. …
7. Cobblestone Driveway. …
8. Tar and Chip Driveway.

What is the best maintenance free driveway?

1. Paving Stones. Paving stones are known to last up to a full century if properly laid. …
2. Concrete Grass Pavers. An interlocking concrete grass paver driveway made may be an option for your driveway. …
3. Plastic Permeable Pavers.

How much does a driveway add to your property?

You may be surprised to learn that a driveway does add value to your home. On estimate a driveway can increase your property’s value by 5-10%.

How much is a yard of stones?

OptionPer tonPer cubic yardRocks + delivery + installation$75 – $240$85 – $310

How much is a truckload of gravel?

How Many Tons of Gravel In A Dump Truck? A 10-wheel dump truck carries 12 to 20 tons of gravel or around 8 to 10 yards depending on the rock size and type.

What size gravel do I need for my driveway?

A commonly used gravel size for driveway base layers is #3 gravel. This rock is generally 1-2 inches in diameter and does double duty by establishing a solid, reliable foundation and providing adequate drainage; both critical factors in driveway construction.