Calculating the number of bundles, you need is simple if you are using shingles that come three bundles to a square. Each bundle covers 33.3 sq. ft.

How many bundles of architectural shingles are in a square?

Laminate or architectural shingles, one of the most common types of roofing shingles, are generally packaged in three bundles per square.

How many linear feet are in a bundle of architectural shingles?

The total eave length can be added to the total length of all rake edges to get the total linear feet needed for drip edging. This same measurement is used to calculate the amount of starter strip shingles you’ll need. IKO Leading Edge Plus TMshingles are the ideal starter strip, and a bundle covers 123 linear feet.

How much does a bundle of architectural shingles cover?

Each bundle covers 33.3 sq.ft. of roof area—close enough to the 32 sq. ft.

How much is 1 square architectural shingles?

You can expect to pay $1.00 to $1.50 per sq. foot or $100 to $150 per square installed on a standard sized single story home. 50 year architectural roofing shingles could cost from $500 to $785 per square (100 square feet).

Are architectural shingles worth it?

In a word, yes—the benefits of architectural shingles make the extra cost more than worth it. (Which, depending on your contractor, is around $15 per square. … Architectural shingles have many benefits, including better curb appeal, improved wind resistance, and a longer manufacturer warranty.

How many bundles of shingles do I need for a 10x10 shed?

Three bundles but probably four because that would fit it perfectly and even on a tiny little shed 5–10% needs to be calculated in for waste and mishaps.

How do you calculate roofing shingles?

To estimate how many shingles you’ll need, first estimate the total square footage of your roof’s surface. To do this, measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane.

How many squares does a 2000 square foot house have?

Roofing Square Conversion Calculator If your roof is 2,000 sq. feet, then you will have 20 squares. (2,000 / 100 = 20).

How many squares are in 1800 square feet?

A roofing square is equal to 100 feet on your roof. If your roof measures at 1800 square feet, you would need 18 squares of shingles to cover your roof.

Article first time published on

How many feet does a bundle of cap cover?

Each bundle has 45 caps (15 full sheets w/ 3 caps each) and when installed at 6-2/3″ exposure, that will cover a full 25 feet.

How many shingles do I need for 1000 square feet?

Since there are twenty six shingles in a bundle of twenty year shingles (which is fine for starters and edges), divide the result by twenty six. For the number of ridge caps, multiply the length of the hip or ridge by twelve and divide it by five. This house is 1000 square feet. It requires 18 squares of shingles.

How many linear feet are in a roofing square?

24 inches divided by 12 inches is equal to 2 feet and 36 inches divided by 12 inches is equal to 3 feet. First we will calculate the 2-foot wide material. Divide 533 square feet by 2 feet and the result is 266.5 linear feet.

How much is a square of 30 year architectural shingles?

The other common type of asphalt shingles are the 30 or 50 year architectural shingles or laminate shingles. These types of shingles are more durable and higher quality because they are thicker than three tab shingles. The cost to install 30 year architectural shingles is usually about $350 to $500 per square.

What's the difference between 3 tab and architectural shingles?

3-tab shingles are flat, and they have a single tab shape and size. … Architectural shingles are also referred to as dimensional shingles. This is because they provide a more dimensional look to the roof. Each shingle appears more dimensional because it is; multiple layers of materials adhere to the base.

How much does it cost to shingle a 1000 sq ft roof?

Roof Size and Pitch A new roof on a 1,000-square-foot house costs an average of $4,000 to $5,500 while the cost to replace a 3,000-square-foot home’s roof can rise to an average of $11,200 to $16,000.

How many bundles of shingles do I need for 1200 square feet?

How many bundles of shingle to repair a 1200 square foot home with architectural shingles. Get quotes from up to 3 pros! Answered by WoWHomeSolutions: Depends on the shingle at the end of the day but I am going to assume 4 bundles per square. At that measurement, you need to figure on 52 bundles at a 10% waste.

How much value does architectural shingles add?

Remodeling’s 2019 Cost vs. Value Report found that the average American homeowner spends $22,636 on a new asphalt shingle roof of midrange quality. That new roof will increase the home’s value by $15,427, on average. That works out to 68 percent of the investment.

Are architectural shingles harder to install?

Since an architectural shingle roof is easier to install, is more durable and comes with a better warranty, its lifespan cost is, in many instances, actually less than that of a more basic 3-tab roof.

What color shingles last the longest?

Both light-colored and dark-colored shingles can last longer if given the necessary maintenance. The only thing tested and proven about light-colored shingles is that they help us keep the indoor temperature cooler in the hot summer season.

How do I figure out how many bundles of shingles I need?

The most accurate way to calculate how many bundles of shingles you’ll need is to get up on the roof and measure each roof plane. If all the roof planes are rectangles, you simply need to multiply the length times the width of each plane to get the square footage; then you will add up the square footage of each plane.

How many shingles do I need for a 1700 square foot house?

The shingles cover 33.3 sq. 57 bundles is a ft. 1,700 / 33.3 + 10% for trim.

How many bundles of shingles do I need for 2000 square feet?

The number of bundles or squares you need will depend on the surface area of your roof, and its pitch or slope. For example, a 2,000 square foot roof will require 20 squares or 60 bundles.

How many shingles are in a square?

How Many Shingles In A Square? For regular 3-tab, non-laminated shingles, you’ll have around 78 shingles per square. Some older styles of 3-tab shingles will have up to 87 shingles per square. Architectural shingles will have anywhere from 57 to 66 shingles per square.

How do you find a square foot?

Basic formula for square feet for short), determine the length and width of the area you are working with, measured in feet. Multiply the length by the width and you’ll have the square feet. Here’s a basic formula you can follow: Length (in feet) x width (in feet) = area in sq.

What are architectural roofing shingles?

Also known as laminated or dimensional shingles, architectural roofing shingles are among the highest quality roofing products made. Traditionally, they are composed of a heavy fiberglass mat base and ceramic-coated mineral granules that are tightly embedded in carefully refined, water-resistant asphalt.

What is linear feet?

Technically, a linear foot is a measurement that is 12 inches long (so, one foot) and that is measured in a straight line, which is why it’s called linear.

How much does it cost to shingle a 1200 square foot house?

House (& Roof**) by Square FootRe-Roofing Cost*1,000 (1,054)$4,000 – $5,5001,100 (1,160)$4,200 – $6,0001,200 (1,265)$4,500 – $6,5001,500 (1,581)$5,500 – $8,000

How do you figure linear feet for a roof?

Divide the area of your roof in linear inches (calculated in Step 3) by 12 to convert the inches to feet. The resulting figure is the area of your roof in linear feet. This is the figure you need to determine the correct amount of materials when purchasing by the linear foot.

How many linear feet is 100 square feet?

This is done by multiplying the total square footage by 12. So for a room of 100 square feet where a 5-inch wide floorboard is being used, the number of linear feet needed would be (100 x 12) / 5 or 240 linear feet.

How many linear feet are in a square foot?

Linear Foot vs Square Foot: How many linear feet in a square foot? It may be one of the questions you want to be answered. While a linear foot is a one-dimensional measurement, a square foot is a two-dimensional measurement. A square foot is the result of two linear measurements.