When you first introduce plants to your grow space, if using a 600W light, you need to keep them at least 3 – 4 feet away from your plants to begin with, just while your plants climatise to the heat.

How far should a 600 watt light be from plants?

Grow lights with reflectors (HPS, CMH etc) and boxed LED grow lights spread light wide. So, even when the grow light is hung low over the canopy, some light is going to go over the plants and hit the side wall of the grow tent. The optimum hanging height for a 600W HPS system is only 40cm or 16″.

How much area does a 600 watt grow light cover?

600-Watt HPS grow lights are the most efficient HPS grow lamp. 600W HPS grow lights produce more light output per Watt used than other wattages and cover around 36 square feet. 1000-Watt HPS grow lights are the most powerful and cover a wider area of around 49 square feet.

How many plants can I grow with a 600w LED light?

2 month plants should give about 40g per plant, so with about 9 you’ll be able to easily fill a square meter and get up to 400g per 600w light. 3 month autoflowering plants grow much bigger, however, so you should only plant 4 per 600w light.

How far should 600w HPS be from seedlings?

Unlike LED grow lights, HPS lights produce more heat, so growers need to know how far to put HPS lights from plants. The HPS distance from seedlings should generally be between 10 and 14 inches from plants.

How close should my grow light be to my plants?

In general, you’ll want to hang your light no more than 12″ away from your plants. – Remember: after 12″ fluorescent lighting loses its power, so make sure you don’t raise it any more than 12″ above your canopy otherwise your plants aren’t getting light energy.

How do I know if my grow light is too close?

The first signs look like thin outlines on the outside of the leaves, so if you catch this quickly you will have a chance to avoid further damage. If some of the leaves start curling up, it might also be a sign that the plant is too close to the light. Good ventilation usually also helps with this issue.

How many plants fit in a 3x3 grow tent?

You can have around 2 to 4 plants in your 3×3 grow tent.

How much can a 600w LED yield?

A 600w HPS light can produce up to 150 to 300 grams in optimal growing environments, which is 0.5 grams per watt or less. LEDs, however, can produce as high as 1 to 1.5 grams per watt.

How many watts do I need for house plants?

Low-light plants should receive between 10 and 15 watts of fluorescent light per square foot of growing space. A single fluorescent tube such as a 2-foot 20-watt tube or a 4-foot 40-watt tube without any other light provides only enough light for plants in this category (Table 1).

Article first time published on

How many watts does a plant light need?

As a rule of thumb, aim for 20 to 40 watts per square foot. Divide the wattage of your bulb by 20 (such as 400 watts divided by 20 = 20), and then divide the wattage of your bulb by 40 (400 divided by 40 = 10).

How many watts of light do I need per square foot?

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.

How many plants can a 600w HPS grow?

Sixteen plants that are grown under a 600-watt HPS lamp could produce about 37.5 grams or 1.3 oz of marijuana per plant. Under perfect, outdoor conditions, you can expect yields to extend to 500 grams or 17.5 oz per plant.

Can I veg with 600w HPS?

In response to the general question, can you use an HPS bulb for veg, the answer is yes. … Basically you can use just about any light out there for any stage of growth, the real question is how well do each bulb work for veg.

How far away should my lights be during flower?

During the flowering stage LED Grow lights should be located between 16-36 inches from the plant canopy. Moving the grow light closer will increase the light intensity which can maximize photosynthesis.

Can plants burn under grow lights?

Light, even intense light, probably won’t burn your plants. If a plant is getting too much light, it can challenge your crops and be counterproductive, but it won’t actually cause burning. … Usually, it’s the heat that burns your crop, causing tissue death and crop losses.

Can plants burn under LED grow lights?

The reality is that modern LED grow lights can produce a very high level of light and it can cause photo-bleaching and burn leaves. This depends very much on the plant, but a PPFD of 800 is enough to damage some plants.

Can grow lights be too bright?

The answer is a definite no. While plants need light to survive, too much light and heat can damage them or kill them off.

Can you have too much light in a grow tent?

Getting It Right Although too much light can impede plant growth, it’s also a fairly easy problem to fix. … Experts recommend 100 watts of light for a 2 foot by 2 foot grow area, up to 1,000 watts for an 8 foot by 8 foot area.

What color light is best for plant growth?

• Violet-blue light in the 400 – 520 nanometer range encourages chlorophyll absorption, photosynthesis, and growth.
• Red light in the 610 – 720 spectrum range promotes flowering and budding.

How bright should grow lights be?

Vegetable seedlings and other “full sun” plants require about 2000 to 3000 lumens (at minimum) per square foot of growing space. So, if you’re growing just a single standard tray of seedlings, using a grow light that emits 3000 lumens is sufficient.

How many plants can you grow in a 4x2 tent?

If you keep your plants small, you can fit 8 or more of them in a 2 x 4 foot grow tent. If you let them grow to a “normal” size, you can get two in a 2 by 4 area.

How many plants can you grow in a 4X4 tent?

Answer: Putting 6 plants in a 4×4 grow tent leads us to a plant density of 1 plant in each meter square area. That’s a pruning style growing, from where you can expect about . 25 lbs of harvest from each plant.

How big should my grow tent be?

To figure out the tent size you need, simply multiply the number of plants by the square footage of each plant. For example, 4 medium sized plants take up 4 square feet each, for a total of 16 square feet. So you need a tent that has 16 square feet of space, which is a 4 by 4 tent.

Do you need intake fan for grow tent?

Larger grow tents can benefit from using passive air intake as well but will require higher CFM exhaust fans. Air intake is only a part of the indoor growing equation. Many factors like grow tent size, grow lights, and inline fans contribute to creating the optimal growing environment.

How big of a tent do I need for 2 plants?

Here is a quick guide to sizing your tent with how many plants you can grow: 2′ x 2′ Grow Tent – Great for mother plants (1-2 plants) 2′ x 4′ Grow Tent – Fits in most closets (2-4 plants) 3′ x 3′ Grow Tent – Ideal for people with a limited work area (2-4 plants)

Do plant lights use a lot of electricity?

Do grow lights use a lot of electricity? Grow lights don’t use as much electricity as you may think. … However, since most grow lights are so energy efficient, you are getting huge amounts of light (and growing power) for your money! Make sure your grow room’s power circuit can handle the power draw.

What lights help plants grow?

red & blue grow lights. Most grow lights are either full spectrum, which means the light they emit spans the entire electromagnetic spectrum (similar to the sun), or they provide particular tones that plants find the most useful for growing—specifically red and blue light.

Do normal lights help plants grow?

The Takeaway. So, to answer the question, yes you can use a regular light bulb to help plants grow. Your best bet would be to place a few LED lights designed for plants near your plants that need a little extra light. Be sure not to overheat the plant or to give it too much sun.

How much light does a grow tent need?

Standard advice says you should aim for 32-50 watts per square foot of grow space. More like 25 watts if your grow space is a dedicated veg tent. So if you were working with a 3′ x 3′ space, you’d theoretically want an LED light with a power draw somewhere between 225 watts (vegetative) and 450 watts (flowering).

How many watts do I need for a 5x5 grow tent?

For a 5×5 tent, it’s best to use about 1000 watts (High-Pressure Sodium) lights.