Formula multiply the length value by 9

How far apart can I string lights?

The average spacing between sockets on a patio light string is at least 12 inches. However, spacing can range from 12 inches to 3 feet wide.

How high should backyard string lights be?

How high should lights be hung off the ground? Patio light display scenarios can vary widely and it’s not uncommon to see lights hung at very different heights even from one end to another. Generally, though, it’s good to have lights 8-10′ off the ground at a minimum just so there’s walking clearance.

How long should string lights be?

Simply buy string lights that are 2 to 6 feet longer than your linear measurement to create the swag of your choice. It’s always better to have more string length than you need because you can always shorten it by doubling it up on the ends.

How many patio string lights can you connect together?

1440/100= 14.4. Therefore, your circuit can only handle 14 incandescent light strings connected together. On the other hand, if an average LED string light set uses 10 watts, then 1440/10=144. That means you can have 144 light strings connected together if they’re LED!

How far apart should you space outdoor lights?

Generally speaking, you have to plan where should outdoor landscape lights be placed. It is preferable to put your lights six to eight feet apart to ensure your pathway remains bright and well-lit. However, spacing them even closer is an option, particularly if you want an especially vivid effect.

What do I do if my string lights are too long?

The best way to shorten lights wired in series is to remove an entire series section of lights by cutting lights apart where there are only has two wires, with the lights unplugged. Then, simply cap each of the two cut wires with a wire connector.

How much do string lights sag?

Strands longer than 40′ will sag down to height of 7 feet or lower. Strands longer than 50′ can topple over a pole with over 200 lbs of weight in the base. Keeping that in mind, shorter strands are usually easier to set up than longer strands. You will need a support every 40-50 feet of lighting.

Can you leave outdoor string lights up in winter?

Yes you can leave them in freezing weather.

Can you leave outdoor string lights out in winter?

Modern outdoor lights are specially designed to be weatherproof and can be hung out all year round. Though most outdoor lights are weatherproof, you should check the wire and lights once a year and try to install them in a cool, dry place if possible to help them last longer.

Article first time published on

How do you secure string lights to a fence?

Attach metal mounting hooks or cup hooks onto the wooden posts. These hooks will hold your string lights so you want to be sure that you secure them firmly. Screw your mounting hooks or cup hooks into the wooden posts at one end. Install the posts onto your fence to support your lights.

Are string lights tacky?

Fairy lights are the bread and butter of Christmas decorating: the atmosphere-creating, life-giving backdrop. But they can just as easily be tacky and headache-inspiring as they are magical and sophisticated.

How many lights do I need for an 8 foot Christmas tree?

“A good rule of thumb is 100 lights for every foot-and-a-half of tree,” according to Lowe’s. But Better Homes & Gardens recommends using three 100-light sets for every foot of a tree’s height.

How many strings of 100 lights can you connect?

For example, if you have a 15-amp circuit at home, that’s 1440 total wattages. For an average 10 watt incandescent string of lights, the formula is 1440/100= 14.4, which means you can string 14 strings of lights together. Compared to LEDs at 10 watts, it’s 1440/10=144, so you can string 144 strings of lights together.

How many LED C9 lights can I string together?

Follow these recommendations when decorating with multiple strings of regular incandescent commercial Christmas lights: For mini bulbs of 50 to 100 per string, connect a maximum of three strings together. For larger bulbs such as C7, C9, etc., string together no more than 50 bulbs total.

How many LED lights can you put on a circuit?

Breaker Limitations Each CFL or LED bulb typically gives the same amount of light as a 60-watt incandescent bulb while drawing 10 watts or less, which is equivalent to a current draw of 1/12 amp. Thus a 15-amp circuit can safely control 180 or more fixtures that use CFL or LED bulbs.

Can you shorten patio string lights?

Patio light strings without end plugs are available that can be cut to any desired length. Commercial stringers and spools for Christmas lights come with sockets already attached and can be shortened as needed. … If cut, these lights will no longer work and there is no way to attach it.

How long do outdoor string lights Last?

Outdoor LED lights can last up to 50,000 hours with the right maintenance and care. If you’d like to improve your home’s ambiance and safety, you can’t go wrong with eco-friendly and long-lasting LED lighting. If you’re in need of dependable LED lights for your home, Birddog Lighting can help.

How far apart driveway lights?

In order to avoid the runway effect, path lights should be placed every ten to fifteen feet on alternating sides of the driveway. Additionally, you may choose to highlight features or plants along your driveway. Often a few up-lights in trees or shrubs that line the driveway provide the perfect amount of light.

Where should outdoor lights be placed?

Ideally you’ll place outdoor lights in key areas close to where you’ll be moving or operating at night, such as porch lights or garage lighting. Exterior wall lights can be placed next to a porch, in front of a garage, at a side door, or on a rear wall depending on how you access and move around the building.

How far apart should retaining wall lights be?

How To Install a Hardscape Light In a Retaining Wall. Step 1: Measure and mark the locations for each light. Use a spacing of every 6 to 7 feet.

Can you leave string lights on all night?

Yes. Barring defects, power failure, dead bulbs, or some world-ending event, most LED light strings you come across will remain lit, safe, and functional all night. The likelihood of those issues happening is slim. LED light strings have highly reliable build quality and are a resilient technology.

Are outdoor lights safe in rain?

As long as you’re using “outdoor” lights, it’s safe to leave them in the rain as they’re built to brave the environment. However, with a connection of string lights, a heavy downpour can blow up the individual fuse in each string light. This usually happens when water bridges the prongs on the plug.

How do you protect string lights from rain?

1. Only Use Outdoor Rated Extension Cords. …
2. Use Outdoor Rated Bulbs. …
3. Use String Lights Meant for Outdoor Use. …
4. Avoid Leaving Open Sockets. …
5. Protect Connected Plugs From Water. …
6. Don’t Use Uninsulated Metal Hooks or Staples to Hang String Lights.

How do you hang heavy duty string lights?

1. Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. …
2. Step 2: Mount Screw Hooks. …
3. Step 3: Connect & Tighten Cable. …
4. Step 4: Attach Your String Lights. …
5. Step 5: Sit Back and Enjoy!

Are patio lights tacky?

Outdoor Christmas lights are not tacky. If you plan your display and take some time to create a tasteful layout, you can put up professional-looking festive lighting that you, your friends, family and neighbors will all love – especially the children.

Are outdoor lights safe in snow?

Make sure your lights are rated for the outdoors A regular lightbulb might work just fine on your porch when there’s no rain or snow, but when moisture creeps in, you could run into trouble.

Can solar string lights catch fire?

Since solar-powered lights get their energy from small solar panels that charge batteries, they do pose a low fire risk. Solar Lights with lithium-ion batteries run the highest chance of catching fire, mainly due to highly reactive materials and lithium salts used in their construction.

How do you hang string lights outside without trees?

1. Hanging Lights on 4X4 Posts.
2. Using Metal Pole and PVC. …
3. Along the Fence Lighting.
4. Deck Lighting.
5. Gazebo or Pergola or Covered Patio String Lights.
6. String Lights on Umbrella.
7. Use Planters to String Backyard Lights.

How do you hang string lights without holes?

Using Hooks If you can’t repurpose your backyard to hang the lights, then the next best option is to go with adhesive hooks. They can be bought at any hardware store and allow you to hang lights without leaving nail holes in your walls.

How do you hang outdoor lights on concrete?

If you prefer, put concrete around the post almost to the top of the container. Let it dry and cure. Then sit small, potted plants on top of the concrete. Use a ladder to drape the lights over the hooks at the top of the posts or attach them to the hooks with twist ties.