A Kreepy Krauly draws water from the bottom, top and sides of your pool ensuring circulation of pool water and improving water quality. This helps remove biological particles and fine particles that can cause your pool to look cloudy.

Can I leave my Kreepy Krauly in the pool?

Most people don’t know that your Kreepy Krauly is designed to stay in the pool working away so you don’t have to. … This will ensure naughty leaves that slip through your pool blanket will be whisked away to prevent staining and ideal circulation will be maintained without the need to get your hands cold.

Why does my creepy-crawly stay in one spot?

The Main Cause: A Coiling Hose You have taken your hose out of the pool and stored it. It coiled. Over time the top layer of your pool water has slowly reset the memory of your hose.

How long should a creepy-crawly run?

HOW LONG SHOULD A KREEPY KRAULY RUN? Just as long as it needs to, which is generally about 2-4 hours depending on the size of the pool and the amount of debris. Best practice is to remove Kreepy from the pool after you are satisfied with the results.

Why is my creepy-crawly not moving?

If Kreepy Krauly is not moving or not pulsating. Check that the main drain and all suction lines are closed, except for the suction line to which Kreepy Krauly is attached (usually a skimmer). Check for debris in the filter or [pump basket]. … Debris may prevent flapper movement.

Can you leave a pool vacuum on all night?

Cleaners aren’t meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.

Can you swim with a vacuum in the pool?

Increases Wear and Tear. You can swim while your bot cleans the pool, but it’s better not to. Swimming churns up the water. If the machine is in the water at the time, the current will buffet it, making it harder for it to complete its work.

How often does a pool need to be vacuumed?

The most important thing you can do on a regular basis is to vacuum your pool. This should be done at least once a week, ideally twice. However, if you don’t have a lot of debris, such as leaves, bugs, etc. or if you have a screened in pool, once a week should be sufficient.

Can I run my pool filter every other day?

The pool water has to go through your pool filter (turnover rate) at least once a day. … When shopping for a pool pump, look for one that has the required GPM or more, but never less. Run the pump for 8 hours, every 24 hours. You can also pause in between; there is no need to run it continuously.

How long should you run pool sweep?

A manual vacuum should be run as long as it takes to remove all visible dirt and debris on the bottom and sides of the pool. For a small, well-maintained pool, this usually takes around 20 minutes. For a very dirty small pool, or a maintained larger pool, it may take around 45 minutes.

Article first time published on

Why does my pool cleaner go in circles?

Sometimes it gets stuck in the corner of the pool by the steps; other times it goes in circles. … This is most likely caused when pool cleaners are left in the pool 24/7. When the water is cold or cools off from a warm day, the plastic in the hose gets a memory and curls slightly.

Why does my pool sweep stays in deep end?

The cleaner does not reach all areas of pool, stays in deep end. Hose length is incorrect. Adjust hose to required length using the measuring tape included with the cleaner.

Why does my pool cleaner not move?

If you have a suction pool cleaner that is not moving, check the cleaner hose. It should be firmly attached to the suction line in the skimmer or the cleaner line. … For these types of pool cleaners, the culprit is usually a problem with the hoses that are either clogged or not connected properly.

How do I know if my pool vacuum is working?

Verify that the vacuum hose is firmly inserted into the inlet port at the skimmer; then inspect the hose for cracks or holes. The skimmer filter is dirty. Pull out the filter basket and check for debris that may be interfering with water flow to the pool pump. Air is getting into the pump through the pump cover.

How long does it take to backwash a pool?

Open the air bleeder assembly on your filter and turn pump on. Watch the pressure gauge for spikes. After the hose fills with water, backwash your sand filter for 2 – 3 minutes, or until water runs clear.

Do I backwash after vacuuming pool?

Yes, we recommend backwashing after you vacuum your pool. This allows the filter to shoot out any dirt / debris you have vacuumed up. Don’t forget to set your filter to “rinse” for 30 seconds after backwashing!

How often should you backwash a pool?

“When do we need to backwash?” – It is recommended to backwash your filter once every 4-6 weeks of regular use. Additionally, there are several instances that would require backwashing in between the normal monthly backwashing.

Do you really need a pool vacuum?

All pools both above ground and in-ground need to be vacuumed. Theoretically you can abandon all vacuuming duties, but watch your pool water look disgusting, dirty and cloudy. The process of vacuuming keeps chemicals working their best and increases the desire and appeal, especially on a hot summer day.

How many hours per day should I run my pool cleaner?

The rule of thumb for pool maintenance is to run your pump for eight hours per day.

Can I leave my dolphin in the pool?

Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.

Are robotic pool vacuums worth it?

Bottom Line: Yes! Robotic pool cleaners are 100% worth the investment. It’ll be the best money you ever spent on your swimming pool. Any automatic swimming pool cleaner should be able to clean your pool within about three hours, depending on your pool’s size.

Should you cover pool when raining?

When preparing your pool for a storm, leave it uncovered. Installing any kind of cover across the pool will not do much to protect against dust and contaminants because storms often bring strong winds and heavy rain that can cause the cover to lift off your pool.

Is it bad to run your pool pump 24 hours a day?

The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.

Can I leave my pool pump off for a week?

Yes you can turn your pool pump off for a week. You can turn it off for a month, but there are consequences. The pool will get dirty—no pump, no filtering. The chemicals will not circulate and the water could start turning a nice shade of green as algae forms.

How often should you brush pool walls?

Brushing thoroughly 1-2 times per week will prevent these materials from having the time to create a stain. Brush to Prevent Algae: Every pool can grow algae, but plaster, quartz, and aggregate finishes are more susceptible.

How do I clean the dust out of my pool?

Brush the walls every week during swimming season while the pump is turned off. A vacuum removes the debris that collects on the bottom. Vacuuming requires moving the vacuum head over the debris on the bottom of the pool until the bottom appears clean.

How can I clean my pool without a vacuum?

A nylon or rubber brush is the correct choice for scrubbing the sides of a soft-sided above-ground pool. A large pool brush makes quick work of the job, but you may need a smaller brush to clean corners. Once the particles have been removed from the sides of the pool, turn your filter back on and agitate the water.

How long does it take to filter a dirty pool?

You need to raise the level of your chlorine – shock the pool – and maintain that high level until all the algae is dead. This may take 3 to 4 days. RUN THE FILTER 24 HOURS A DAY. You must maintain that high level of chlorine.

How long should I run my pool pump after shocking?

Let the pump run for about 6 hours or more and test the water. Don’t use the pool right away – wait for the free chlorine levels to drop to 1 – 3 ppm before it is safe to swim.

How long does it take for dirt to settle in a pool?

If left dry, clay and silt will settle rather quickly, i.e., 1-2 years. If they come in contact with water, they can settle in just a few months.

Does the pool cleaner climb walls?

By connecting to your pool’s skimmer or dedicated vacuum line, a suction side pool cleaner will automatically traverse the floor and walls of your pool, grabbing up anything in its path.