Do not sand between coats, as this product needs the full application thickness from each coat for its UV effectiveness. If absolutely necessary, scuff lightly with a Scotch-Brite™ pad, or lightly sand sags or drips away with 320-grit sandpaper; an extra coat of Cetol may be necessary after sanding.

How do you apply sikkens?

Apply liberally to entire area, working the solution into and around the fastener inset areas where iron stains exist. Work into the wood-grain with a stiff bristle brush in a scrubbing motion to accelerate the brightening and cleaning process. Allow the oxalic acid solution to sit on the surface 15-20 minutes.

How long does sikkens cetol last?

Sikkens states in their literature that you should expect to get 2-4 years life out of their system on a sunny side of a house, and 3-5 years on a shady side. At this point, maintenance should be performed. Maintenance is cleaning the surface gently with bleach, TSP, and water.

How do you use cetol?

Apply only one coat of Cetol SRD by natural bristle brush, roller or spray. If spray or roller applied, Cetol SRD must be back brushed immediately to ensure penetration and to avoid an uneven finish. When using Cetol SRDRE , brushing is the preferred method for application on decks and other horizontal surfaces.

What is the difference between cetol 1 and cetol 23?

Cetol 1 is a premium, translucent exterior wood basecoat to be used with Cetol 23 Plus. Its superior oil alkyd formulation offers excellent penetration and adhesion to vertical wood surfaces. Cetol 23 Plus is a premium, translucent topcoat for Cetol 1.

How long does sikkens cetol take to dry?

Drying Time: Touch-dry six (6) – eight (8) hours; dry to walk on after 24 hours minimum at 68º F and 65% relative humidity. Note: During application, moisture content of wood substrate should not exceed 21%. Do not apply when rain, dew, or frost are forecast within five (5) hours of application.

How do you use cetol in the Marines?

Apply 3 coats of Cetol® Marine Natural Teak. Always allow 24 hours drying time in between coats. Sanding between coats is not recommended as this will result in a reduction of dry film thickness. Recommended film thickness must be applied to ensure effective product performance.

How many coats of cetol are there?

Cetol 1 is always used as the first coat in any bare wood application. All systems consist of three coats. All three coats must be applied within 30 days after preparation.

Can you paint over Sikkens stain?

Registered. Personally I wouldn’t paint over sikkens unless I primed it with a great oil primer first…. maybe even sand and then oil prime. Even then I would do a tester first to see how it went.

How do you maintain Sikkens SRD?

Apply a cleaning solution of four (4) ounces of oxalic acid to one gallon of warm water using a garden sprayer or a heavy nap roller cover. Allow solution to dwell on surface for 20 minutes then thoroughly rise with clean water. Do not allow solution to dry on wood surface.

Article first time published on

Is sikkens worth the money?

Sikkens is a world class product that is head and shoulders against other deck stains, oils and look alikes. Been using Sikkens for 23 years and have always been satisfied. Not cheap, but worth ever dollar. Takes 24 hours to dry and looks terrific when cured.

How long does sikkens cetol filter 7 take to dry?

The coverage rate greatly depends on the method of application being used and the nature of the substrate to be coated. Drying times at 20°C/ 65% relative humidity: Dust dry: after approximately 4 hours. Recoatable: after approximately 16 hours.

What does cetol mean?

conjunction. interjection. article. Cetol is a noun. A noun is a type of word the meaning of which determines reality.

Does sikkens make a clear coat?

Sikkens Proluxe Cetol Maintenance RE Clear Topcoat is available in a satin finish for maintenance applications.

Is sikkens cetol oil based?

Sikkens Proluxe Cetol SRD is a one coat, oil-based, translucent exterior wood finish. Sikkens Proluxe Cetol SRD was created for use on a variety of wood surfaces including siding, rails, decks, and logs.

How do you use Sikkens Cetol HLS plus?

1. Apply 1 coat with a good quality, long haired, natural bristle brush in a full flowing coat, laying off in the direction of the grain, using the minimum number of brush strokes necessary.
2. Leave to dry for 24 hours.
3. Finish joinery with two coats of Sikkens Cetol Filter 7 Plus.

How many coats does cetol 23 have?

After preparation, apply 1 coat of Cetol 1RE and 2 coats of Cetol 23 PlusRE assuring a 24-hour dry time between coats. If possible, back prime with the first coat. During application, saturate all end grains, nail holes, cavities and cracks in the wood.

What is sikkens?

Sikkens inspires architects, designers and painters with our many tools and collections, including the well-known 4041 Color Concept. We also provide expert advice on trends and decor for interior and exterior application. Working together with our customers to solve the challenge they face is one of our specialties.

Can you use sikkens on decking?

Sikkens CETOL® WF 761 is designed for Decking in mind and is a Brushable 1K Waterborne Acrylic, High-build, Tranlucent Stain that can be used as a one pot solution on both exterior and interior stable timber components.

Which deck stain lasts the longest?

• Solid. Just like regular paint, solid stains hide the grain of wood, and the best should last three to five years on a deck, the longest of the three types of stains. …
• Semi-transparent. …
• Clear sealer.

How long does sikkens HLSE take to dry?

Allow a minimum drying time of 24 hours between coats.

Can you stain over Sikkens cetol?

If its cetol 1 it shouldn’t be on a deck in the first place. A semi trans won’t penetrate over Cetol 1, that’s your next problem. Only thing you can do without stripping is a solid stain.

Is Sikkens paint any good?

More than likely to be the junk fast grown wood, Sikkens range are very good products as are Sadolin. The wood would benefit from a wood preservative treatment prior to applying any finishing product but let the treatment fully dry first.

How do you use teak Sikkens?

For best results, apply in direction of grain with a long haired natural bristle brush. Don’t apply In direct sunlight or when surface is hot to touch. Do not apply in wet weather or when moisture content is greater than 18%. Do not apply Sikkens Cetol Natural Teak Finish below the waterline.

Is sikkens a varnish?

A medium build, solvent-borne interior varnish that is resistant to knocks, spills and abrasion.

What cetol 23?

Cetol 23 Plus RE is a translucent topcoat for Cetol 1 RE™. The advanced alkyd resin retains elasticity and offers excellent durability and protection for siding, logs and other vertical surfaces. Key Features: Improved clarity and colour retention. Minimizes occurrence of peeling and blistering.

Is sikkens now PPG?

CRANBERRY TOWNSHIP, PA – PPG announced that its SIKKENS® PROLUXE™ wood finishes will now carry the PPG name. … The PPG ProLuxe product line will contain all of the same Sikkens ProLuxe products and formulas, but will now showcase the updated PPG ProLuxe name and new packaging.

What is cetol HLS Plus used for?

In this video, we cover Sikkens Cetol HLS plus. HLS plus is a low build, solvent-based highly translucent exterior woodstain which can be used as a base coat on doors and windows. It is also the perfect product to choose as an attractive, practical finish coat on soffits, fascias and cladding.