Using Hand Pruners (Secateurs) Correctly

1. The simple rule when using secateurs is to keep the blade to the inside of the tree when making cuts.
2. I DO NOT recommend anvil pruners for any tree pruning situation. If you need to make larger cuts than your secateurs can handle, use a pruning saw.
3. Clean cuts heal quickly.

.

Besides, how do you use secateurs safely?

How to use your Secateurs

1. Always hold the secateurs with the black blade in the upper position.
2. For the most effective cut, place the branch or stem in the jaws at a 45 degree angle. Ensure the branch is as deep as possible in the jaw as this gives you more leverage.
3. Squeeze the handle until you feel a definite stop.

Secondly, how do you bypass secateurs? Perfect the cut location for bypass pruners: For the most exactly-placed cut, line up the blade itself with your cutting site. Remember that the blade passes to the side of its thick base, so the precise spot that the blade comes through shifts about a 1/4” when you flip the tool.

Similarly, it is asked, how do secateurs work?

Secateurs have short handles and are operated with one hand. A spring between the handles causes the jaws to open again after closing. When not in use, the jaws may be held closed by a safety catch or by a loop holding the handles together.

How do you clean and sharpen secateurs?

How to sharpen secateurs with a diamond tool

1. Loosen and remove the central nut.
2. Clean your blade before sharpening, to reveal its condition.
3. Handheld blade sharpeners generally don't require oil but could have a coarse and fine side, so start with the coarse side.
4. Sharpen the angled side of the blade only.

Related Question Answers

What is the difference between pruners and secateurs?

What's the difference between the bypass and anvil pruners? Bypass pruners (secateurs) are like scissors where the top blade or big blade passes by the lower smaller blade, whereas; the anvil pruners have one blade that smashes into the anvil (bottom flat piece) to cut.

Can you sharpen pruning shears?

Sharp pruning shears make life easier than a pair of dull, rusty shears. You can easily sharpen your pruning shears at home with a medium or coarse diamond hand file. After you clean the shears and remove rust with a piece of steel wool, use the file to sharpen the cutting blade of the shears.

Which is better bypass or anvil pruners?

Anvil pruners work similar to a knife where a blade is pushed through the plant material onto a cutting board, ie the anvil. Bypass pruners work more like scissors where two blades pass by each other. At first glance there does not seem to be much of a difference between these tools, but the difference is significant.

How do you sharpen pruners by hand?

How to: Sharpen Hand Pruners

1. Clean the pruners. Using a wire brush, steel wool (sandpaper also works) and elbow grease, remove all of the dirt and rust.
2. Inspect the pruners, especially the blade. Examine the blade for any burrs, nicks or cracks.
3. Choose a sharpening tool.
4. Sharpen the blade.
5. Lubricate and reassemble the pruners.

What are anvil pruners used for?

Let a rough-cutting anvil lopper do the grunt work of chopping off thicker dead branches (up to 2 inches) or trimming back live ones before you make the final cut with bypass loppers. An anvil pruner can snip away dead twigs and branches up to ½ inch.

What are the best type of secateurs?

The best secateurs you can buy right now

1. Felco Model 12 Secateurs.
2. Spear & Jackson Razorsharp Ratchet Secateurs.
3. Fiskars PowerGear Pruner.
4. Stihl Professional Secateurs.
5. Wolf-Garten RR5000 Professional Secateurs.
6. Wilkinson Sword Razorcut Pro Angled Pruner.
7. Gardenite Power Drive Ratchet Secateurs.

What oil do you use on secateurs?

Use a shop towel dipped in vegetable oil or a spray lubricant. Wipe off the excess oil before storing the secateurs because it can turn sticky or gummy over time.

How do you tighten secateurs?

Tightening them is straightforward but there's a knack.

1. Loosen the hexagonal nut (it's a locking nut, so you don't tighten it to tighten the play of the secateurs).
2. Undo the bolt, clean the separate parts - a great opportunity to sharpen really well.
3. Rescrew the bolt, and tighten to what feels right.

What are ratchet secateurs?

Ratchet action secateurs These secateurs require less force to use because the ratchet mechanism allows you to make a cut by squeezing and releasing the handles a number of times until you are through the stem.

How do you pronounce Secateur?

Here are 4 tips that should help you perfect your pronunciation of 'secateurs':

1. Break 'secateurs' down into sounds: [SEK] + [UH] + [TURZ] - say it out loud and exaggerate the sounds until you can consistently produce them.
2. Record yourself saying 'secateurs' in full sentences, then watch yourself and listen.

Which pruners are the best?

The Best Garden Pruners

• Our pick. Felco 2. The Best Garden Pruners. They're sharp, durable, smooth, easy to repair, and easy to find.
• Also great. ARS HP-VS8Z. Great pruners, not as common.
• Budget pick. Corona BP 3180. Not as sharp.

What are anvil secateurs?

Anvil secateurs. Anvil secateurs have a cutting blade that comes into contact with smooth metal, and are suitable for cutting finger-thick branches and solid wood. However, as anvil secateurs do bruise the plant tissue, they should only really be used for cutting or chopping up dead wood.

How do you sharpen an AXE?

The first step in the axe sharpening process is to find the bevel angle on one side of the axe. Then, while matching the bevel angle, start pushing the heavy duty sharpener against the edge at the proper angle. Make sure to push against the edge and not pull into it, much like when knife sharpening.

What kind of oil do you use for garden tools?

Lubricating Oil: Such as boiled linseed oil, tung oil, motor oil, lamp oil, or cooking oil. Boiled linseed and tung oil are probably the best choices, but you can use what you have on hand. Safety Equipment: Wear gloves, eye protection, and a dust mask when working on tools.