Diagonal cutting pliers are used for cutting wires, screws and nails. … They are small hand tools originally designed for electricians to cut small wires but they are so useful they can be found in almost every toolbox.

Can you cut nails with diagonal pliers?

Diagonal cutting pliers are used for cutting wires, screws and nails. … They are small hand tools originally designed for electricians to cut small wires but they are so useful they can be found in almost every toolbox.

Can you cut wire with diagonal pliers?

Diagonal pliers are useful for cutting copper, brass, iron, aluminium and steel wire. … However higher quality side cutters can cut hardened steel, such as 2 mm piano wire.

What do diagonal side cutters do?

Diagonal cutters are designed for crimping or wedging cable apart to allow precision cuts. They provide a diagonal cut and are commonly used on soft copper or aluminium electrical conductors.

What is the difference between side cutters and diagonal cutters?

Diagonal cutters cut straight through the material leaving a flush-cut while side cutters leave a sharp end. This makes dikes more suitable for cutting jewelry because they do not leave sharp ends. Sharp wire ends on jewelry can be injurious.

Are diagonal pliers the same as side cutters?

They cut wire by indenting and wedging a cable apart (as opposed to shearing like scissors). The name comes from how the cutting edges of the jaws are set at an angle (hence the name “diagonal”). They are also known as side cutters, flush cut pliers, side cutting pliers, wire cutters, diagonal cutting nippers.

What is the purpose of a needle nose pliers?

Needle-nose pliers are used to manipulate wire using the textured teeth. When working with this tool, the handles should be gripped tightly yet apply gentle force. They are not sturdy enough to cut large, hardened wires, and they are not to be used on live electrical wires.

What can cutting pliers cut?

End-cutting pliers – also known as nippers, are used to cut nails, wires, rivets, and bolts. Due to the almost flat head design, the user can get flush with the surface to cut the object, without digging into it.

How do side cutters work?

Side/diagonal cutters They cutters work by indenting and wedging the wire apart and offer a cleaner finish than a knife or scissors. They provide a diagonal cut and are commonly used on soft copper or aluminium electrical conductors.

What is a diagonal cutting pliers tool?

Diagonal cutting pliers are used for cutting wire and small pins in areas that cannot be reached by larger cutting tools. Because the cutting edges are diagonally offset about 15 degrees, these can cut objects flush with a surface.

Article first time published on

What do diagonal pliers look like?

Diagonal pliers have a pair of jaws, a fulcrum point, and a pair of handles that are often dipped in colored plastic which serves as an insulator. … Diagonal pliers are specially designed pliers used for cutting wire. The jaws are sharp and beveled to cut wire closely and effectively.

What can I use if I don't have wire cutters?

• Hacksaw. A hacksaw has a thin metal blade roughly 12 inches long, supported on each end by a metal frame. …
• Tin snips. Tin snips has two sharp blades, with handles roughly 8 inches long. …
• Angle Grinder. …
• Reciprocating Saw.

Are wire cutters and diagonal cutters the same?

Electricians utilize diagonal pliers at work and they like to call them flush cutters to distinguish them from symmetrical wire cutters. … Symmetrical wire cutters leave the wire with a pointed tip after they cut it, but flush cutters do not. Flush cutters enable you to cut wires that are very close to their base.

Are cutting pliers the same as wire cutters?

Remember that wire strippers are best for removing the insulation from wire, while cutters are best for (you guessed it) cutting wire. Pliers help you reach, bend, grab, cut, hold and loop wire, and crimpers are the best tool to join two pieces of ductile material together.

How do you use snipe nose pliers?

1. Align the open jaw of the needle nose pliers over the area you will like to grab.
2. Squeeze the handle down tightly until the pliers has secured itself.
3. With the other hand use the chain nose or round nose to open or manipulate the wire.
4. Secure your component and close.

When using pliers you should always?

• Pliers should not be used for cutting hardened wire unless specifically manufactured for this purpose.
• Never expose pliers to excessive heat. …
• Always cut at right angles. …
• Don’t bend stiff wire with light pliers.

What are the cutting tools and their uses?

• Single point turning tool—cutter for turning operation performed in lathe.
• Drill—cutter for drilling operation performed on drilling machine or lathe or milling machine.
• Milling cutter (or mill)—cutter for milling operations performed on milling machine.

What are end nippers used for?

End cutting pliers (often called end nippers or end cutters) are a set of pliers with a cutting edge designed to help cut through material with a flush finish.

What are cutters used for?

In the context of machining, a cutting tool or cutter is typically a hardened metal tool that is used to cut, shape, and remove material from a workpiece by means of machining tools as well as abrasive tools by way of shear deformation. The majority of these tools are designed exclusively for metals.

Which is diagonal line?

A diagonal is made out of a straight line that’s set at an angle instead of straight up or across. If you picture a square and draw a line connecting the opposite corners, that’s a diagonal line. You’ll find diagonal lines in geometry, and also in the world around you.

When were the diagonal pliers invented?

Shop for Diagonal Cutting Pliers Wire cutting tools, although around before, came into their own in America during the 1800s.

What is diagonal slicing?

Diagonal Cut. When diagonal cutting, the knife enters at a 45 ° angle. … Tender, fleshy vegetables (cabbage) or cylindrical or vegetables with stalks (celery) are sliced diagonally-or French cut-to avoid a stringy texture.

What are cutting pliers used for in Granny?

-Can be used to cut the wire above the Electrical Box and disable the Electrical Lock on the Front Door. -Can be used to open the Chained Box in the Jail Room, by cutting the chains locking it. The Cutting Pliers is an item in Granny: Chapter Two.

Can you use snips to cut wire?

Aviation snips are designed for cutting sheets of material, not rounded stock. Some can be used with wire mesh or net, but they should not be used with a single wire, nails, or other cylindrical materials.

What are adjustable pliers called?

These adjustable pliers are designed to be used as a hand-held vice or clamp that locks firmly onto a workpiece. Also called plier wrenches, lever-wrench pliers, and by the proprietary name Vicegrips, they have a double-lever action.

What is a wire cutter look like?

Flush cut wire cutters (also called “combination” or “lineman’s pliers”) look like an ordinary pair of pliers but feature a pair of cutting blades flush to the outside edge and directly behind one of the plier’s gripping jaws.