Step 1: Position the lawn mower. … Step 2: Check the petrol level. … Step 3: Check the oil level. … Step 4: Check the spark plug. … Step 5: Press the fuel button 3 to 5 times. … Step 6: Put the throttle in the start position. … Step 7: Pull the starter rope. … Step 8: Lawn mowing!

How do you start a lawn mower step by step?

1. Step 1: Position the lawn mower. …
2. Step 2: Check the petrol level. …
3. Step 3: Check the oil level. …
4. Step 4: Check the spark plug. …
5. Step 5: Press the fuel button 3 to 5 times. …
6. Step 6: Put the throttle in the start position. …
7. Step 7: Pull the starter rope. …
8. Step 8: Lawn mowing!

Is MTD and yard machine the same?

MTD’s regional brands include Troy-Bilt® in the Americas, Rover® in the Pacific, and WOLF-Garten® in Europe. The portfolio also includes Remington®, Yard Machines®, Columbia®, and MTD Genuine Parts® brands, all primarily sold in the Americas; and Robomow® which is sold in the Americas, Europe and the Middle East.

Where is the safety switch on a yard machine riding mower?

Yard Machines have a safety switch by the clutch brake pedal, which you must completely depress when starting the mower. Other safety switches are located by the lift and shift levers, and under the seat.

Where is the choke lever on a lawn mower?

There’s a variety of lawn mowers, but for an internal combustion engine, the choke valve is usually located on the body of the engine or a lever on the handle. Most choke valves are butterfly valves mounted in the manifold up from the carburetor jet.

Why won't my riding mower go forward or reverse?

A blocked fuel filter can keep gasoline from flowing to your mower’s engine in adequate supply, resulting in a lawn mower that isn’t drivable. Damaged or clogged air filters also can prevent your lawn mower from going forward or in reverse simply because the engine will overheat quickly.

Why is my lawn mower turning over but not starting?

Q. Why is my lawn mower turning over but not starting? The most likely reason is bad gas. Gas that sits for many months during the off-season will eventually break down, gumming up the fuel line and carburetor in the engine and preventing it from starting.

What are the symptoms of a bad solenoid on a riding lawn mower?

Look for the large terminal posts on the solenoid where the thick red wires connect to the solenoid. Touch the metal shaft of a screwdriver to both of the large terminals at the same time. If the engine turns over and starts, the solenoid is bad and should be replaced.

How do lawn mower safety switches work?

How It Works. The seat safety switch looks like a four-pronged plug with a push button on top. … When you sit on the seat and depress that button, the connection is completed between the battery and the engine, but when you move, it breaks and grounds itself — and the engine stops.

Why does my mower click when I try to start it?

The clicking noise comes from a part called the starter solenoid. The solenoid connects the battery to the starter motor when the solenoid is energized. … The most likely causes of the solenoid clicking instead of energizing full are: Low battery voltage – Battery needs charging or replacement.

Article first time published on

How do I test my lawn mower that won't start?

1. Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten.
2. Dirty Air Filter: Clean or replace.
3. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn’t work, you might need a new fuel filter.

Where is the spark plug on a lawn mower?

Spark plugs are typically located on the back or side of a lawn mower engine. Look for a short wire that’s about 1/4-in. -thick leading to the top of a short, cylindrical protrusion from the engine. If you’re not sure where the spark plug is, consult your owner’s manual.

What does a spark plug tool look like?

The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place.

Why is my Tiller not stay running?

You could have a clogged fuel cap, which can prevent air from entering the gas tank. Loosen the gas cap a little and start the tiller again. If it starts and stays running, try cleaning or replacing the gas cap. A clogged carburetor could also be the problem.

Where is the spark plug on a riding lawn mower Troy Bilt?

Location. In the Troy-Bilt Pony lawn tractor, the spark plug is located on the front of the engine, so open the engine hood and look. A thick black wire is connected to the top of the plug by means of a rubber or metal “boot” that clips over the top of the spark plug.

How many spark plugs does a riding lawn mower have?

There will be one spark plug for each engine cylinder. Most small engines only have one spark plug, twin-cylinder engines will have two spark plugs, four-cylinder engines will have four spark plugs..and so on… The exact location and number of spark plugs will vary with engine style, size and manufacturer.

How do I start my old yard machine snowblower?

1. Insert the ignition key into the starter. …
2. Push the choke lever to “Full” and press the primer button three times to draw gasoline into the mower engine. …
3. Plug the snow blower into a power outlet. …
4. Push and hold the “Starter” button until the engine starts.

Is yard machine a good lawn mower?

The Yard Machines 140cc impressed and exceeded expectations of purchasers who claimed that the mower was very powerful and efficient, it helped many lower the time needed to mow and effectively saved them on fuel. Even though a few had occasional start-up issues, it is a solid choice for lawn care.

What brand is yard machine?

Yard Machines® Since 1958 when the first lawn mower rolled off the line, MTD has been designing easy-to-use outdoor power equipment and building a reputation for quality and dependability second to none. Yard Machines® provides the equipment you need to get yard work done.

Where are yard machine mowers?

Valley City, Ohio, U.S. MTD Products Inc. MTD Products is an American manufacturer of outdoor power equipment for the mass market. Headquartered in Valley City, Ohio, the company began in 1932 and is a majority family-owned, private company, with 20% owned by Stanley Black & Decker.

How can you tell when a spark plug is bad?

1. Your car is a rough starter. …
2. Your car is a rough idler. …
3. Your engine will sometimes misfire. …
4. Your engine surges. …
5. Your fuel consumption is higher than usual. …
6. Your car isn’t accelerating as it should.

How do I know if my snowblower spark plug is bad?

1. The engine requires repeated attempts to start or the engine won’t start at all.
2. The engine misfires or runs rough.
3. The engine starts, but stalls shortly after.
4. There is a noticeable increase in fuel consumption during normal equipment use.

How do I start my lawn mower with a choke?

Open the choke all the way if you notice that it has been closed. If it has been open, the carburetor may be flooded. Close the choke, and pull the starting cord a few times. When you get the engine to sputter, open the choke, and try starting the mower.

How do you start a choke on a riding lawn mower?

1. Sit firmly on the seat.
2. Start the Engine.
3. Press the Brakes.
4. Engage the Parking Brake.
5. Put the Gear to Neutral.
6. Pull the Throttle onto Choke Position.
7. Insert the Ignition Key.
8. Turn the Key to the Right hand side/Clockwise.