Standard traverse rods are only used for pleated draperies. Measure the width of the rod from end to end, this is the face width or rod width. At the ends of the rod, measure the distance from the front of the rod to the wall, this is the return.

How do you measure curtains for traverse rods?

Standard traverse rods are only used for pleated draperies. Measure the width of the rod from end to end, this is the face width or rod width. At the ends of the rod, measure the distance from the front of the rod to the wall, this is the return.

How much do you overlap curtains?

General Installation Recommendations When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.

What size traverse rod do I need?

Use the largest of the three as your window’s width. If you don’t have much space to either side of your window, look for a curtain rod that is the same width as your window. However, if space permits, we recommend that your curtain rod extend five inches past your window on either side.

Can you use regular curtains on a traverse rod?

Regular curtains will not evenly hang in a traverse rod. But with a few sewing and pinch-pleating, you can turn regular curtains into pinch pleat curtains.

How do I know the diameter of my curtain rod?

All curtain rods are measured by their diameter, meaning the width of the pole’s cross-section. Common curtain rod diameters are typically between 1-3 inches, depending on the weight of your curtains.

How do I measure curtains?

Measuring Curtains Measure the full width of the curtain pole or track not the window, excluding any fixtures or finials on the ends. If your curtains are pencil pleat, tab top or eyelet, double this width measurement to account for the way the curtains will be ‘gathered’ at the top.

What size pinch pleat curtains do I need?

Choose your draperies based on the rod width. For a rod that is 40 to 48 inches wide, choose drapes that are 48 to 50 inches wide. A rod that is 49 to 72 inches wide will require drapes 72 to 75 inches wide. A rod width of 73 to 96 inches wide should have drapes that are 96 to 100 inches.

How do you measure fabric for pleated curtains?

Carolina Custom Draperies notes that you should multiply the total width by 2.5 and record the result. This allows for the proper amount of fullness for the pleated drapes. For example, if the total width is 84 inches, multiply 84 by 2.5 to get 210 inches, the calculated fabric width.

How do I know what size curtains to buy?

Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.

Article first time published on

How Big Should curtain rod be?

A good rule of thumb is to have the curtain rod extend three to four inches from each side of the window frame. Using a pencil, make a small mark at the appropriate width on the wall. You may want to use a level to make sure the marks are straight. Accounting for Finials.

Are curtains measured per curtain?

All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.

Can I hang rod pocket curtains on a traverse rod?

The traverse rod provides drawstrings for opening and closing the curtains. Although the traverse rod system was made for pinch pleat curtains, you can adapt almost any rod pocket curtain to work on the rods.

How do you use a back tab curtain on a traverse rod?

If you want to use a traverse rod, that opens and closes with the pull of a cord, you need to alter your tab-back panels to accept a drapery pin. Just by making a small single-finger pleat, the curtains can accept a pin and hold the folds in place as the curtains are opened and closed on a traverse rod.

How do you measure a diameter?

If you know the radius of the circle, double it to get the diameter. The radius is the distance from the center of the circle to its edge. If the radius of the circle is 4 cm, then the diameter of the circle is 4 cm x 2, or 8 cm. If you know the circumference of the circle, divide it by π to get the diameter.

How many yards do I need for pleated curtains?

Finished Length Up ToSolids & Small PrintsMedium Prints (v-repeat up to 12″)60″ Long4.5 yards5 yards70″ Long5 yards5.5 yards80″ Long5.5 yards6 yards90″ Long6 yards6.5 yards

How do you measure for French pleat curtains?

Multiply the number of widths by the cutting length. In the example, the width of 188 inches divided by 54 inches equals approximately 3.5 widths. Multiply 3.5 by the cutting length to give you the amount of fabric in inches. Divide this value in inches by 36 inches to calculate the yardage.

What size hooks for pinch pleat curtains?

Hanging Curtains On A Rod Pencil pleat or pinch pleat curtains use hooks or rings to attach the curtain to the rod (32mm gather hooks are suitable for rod sets with rings).

How many inches are between pinch pleats?

4 inches is recommended for a leading edge. Then you have to divide the rest of the curtain into spaces and pleats. Mine looked like this.

How do you measure for curtain fabric?

To measure fabric for curtains, start by measuring the width and height of your window. If you want floor length curtains, measure from the bottom of the window to the floor, subtract 1 inch, and add that number to the height of the window to get the height of the fabric you should use.

Should you hang curtains above window?

A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.

How much bigger should curtain rod be than window?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

How do you measure the width of curtains?

For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).