How do you make bottle cap pendants?

Here's what to do:

Punch a hole through the bottle cap rim with the hammer and nail.
Cut the photo or image to size with the circle punch.
Glue the image inside the bottle cap.
Let the glue dry.
Apply a thick coating of resin or Diamond Glaze over the image.
Let the resin dry completely.

In this regard, how do you make a locket out of a bottle cap?

When your bottle caps have been flattened, cut a piece of ribbon about 3" long. Use the hot glue gun to glue one end inside each bottle cap, leaving about 1"- 1 1/2" of ribbon in between. Make sure it is secure. Next, string beads on your string or thread until you have enough to circle the top of one bottle cap.

Subsequently, question is, how do you attach bottle caps? Drip glue into the bottle cap on the bowed interior and around the edge. Place it onto the hard paper and use a plastic clothespin to keep it in place until the glue dries. Add beads or glitter to the glue in the cap for decoration and mount the paper onto any surface with glue.

In this way, how do you make bottle cap jewelry?

Here's what to do:

Punch a hole through the bottle cap rim with the hammer and nail.
Cut the photo or image to size with the circle punch.
Glue the image inside the bottle cap.
Let the glue dry.
Apply a thick coating of resin or Diamond Glaze over the image.
Let the resin dry completely.

What can you make with bottle caps?

If You Keep Your Bottle Caps, You Can Do These 20 Epic Things With Them

Craft some earrings. A Beautiful Mess.
Make some neat checkers. Martha Stewart.
Make mini picture frames.
Melt wax to create tiny candles.
Decorate a picture frame.
Make a tiny pincushion ring.
Make a unique key chain.
Craft a cool tabletop.

How do you make bottle cap buttons?

Beer Cap Buttons

Step 1: Stuff Ya Need. To do this little trick you will need.
Step 2: Pin Placement. open the safety pins and bend them open to about 90 degrees.
Step 3: Hot and Gooey. now take that hot glue gun and squeeze a bunch into the inside of the bottle cap.
Step 4: Optional?

How do you make Mod Podge magnets out of bottle caps?

You'll want to use your brush to apply a generous amount of Mod Podge inside your bottle caps, then gently place your circles (face up) in your bottle caps and gently press them into place. Now, this is optional, but you can add another layer of Mod Podge OVER your cardstock circles and allow to dry for a day.

How do you put pictures into a locket?

Steps

Open the locket.
Place a piece of tracing paper or regular paper over the photo recess.
Use a pencil to trace around the recess.
Cut out the tissue paper template.
Place the template over your chosen image.
Cut out the photo to the same size as the template.
Glue the photo into the locket recess.

How do you make a locket clasp?

How to Make a Vintage Locket

Step 1: Hammer Out Two Nickels. Use a smooth faced hammer on a smooth surface.
Step 2: Heat the Metal. Take the flattened coins to your stove.
Step 3: Make a Bottle Cap.
Step 4: Make the Wire Form.
Step 5: Roll the Edge Over.
Step 6: Dome the Cap.
Step 7: Polish the Locket.
Step 8: Cut the Hinge Grooves.

How do you drill a hole in a bottle cap?

Punch a hole into the bottle cap. Place a small, thin nail near the top of the bottle cap, as close to the edge as possible. Hit the head of the nail with a hammer. You will be punching the hole from the inside.

How do you make a hole in a plastic bottle cap?

Drill a hole in a plate the od of your cap. Clamp a different plate on the drill press table and drill a 5/8 hole. Clamp first plate on top of 2nd plate centering the holes as closely as you need. Grind the end of a 5/8 steel rod FLAT.

How do you fold a bottle cap in half?

Instructions

Use a pair of pliers to bend 12 of the bottle caps in half, like a book.
Glue a bottle cap to the center of the canning lid.
Turn two of the “petal” bottle caps so that they are back to back.
Glue all six pairs of the bent bottle caps to the canning lid, going around the center bottle cap.