How to Hang Christmas Lights in Your Room: Clear packing tape on the cord works well, especially for when the lights climb the wall. If you’re hanging your Christmas lights, Command hooks work wonders. (There really doesn’t seem to be an occasion where Command hooks or strips don’t work in a dorm.)

How can I add lights to my bedroom?

In terms of artificial lighting, ambient light is best achieved with ceiling fixtures (like flush mount ceiling lights, chandeliers, pendant lights, etc.) or through portable, like floor lamps. Both lighting types will offer a sufficient amount of lighting for activities that don’t require bright, focused light.

Is it safe to put Christmas lights in your room?

When closed on the light strand, windows and doors can cause wires to break or become frayed from constant pressure, making them a safety hazard for shocks or electric fires. Hanging indoor lights around the window on the inside can look just as nice as outdoor lights.

Can I use tape to hang string lights?

To drape your Christmas lights around the room the way you want them, you need to attach them to the walls in many places along the strands of wire. … Tape the strands to the walls with a wall-safe transparent tape if the walls aren’t white.

How do you hang lights without hooks?

Even if you don’t have built-in features, consider hanging your lights from a bookshelf or other piece of sturdy furniture, rather than the walls themselves. Just make sure you unplug them when you leave the house! Put that brickwork to work: Similarly, a brick fireplace or mantel is an easy place to hang lights.

What is a recessed fixture?

Recessed lights, also known as downlights or can lights, are a type of lighting fixture installed into the ceiling or wall. They are designed to sit flush with the surface for a sleek and polished finish. The housing and electrical wiring components are hidden, and the bulb appears to glow from within the opening.

Where should wall lights be placed in a bedroom?

To ensure a balanced look, keep some guidelines in mind when installing wall lights. The fixtures typically should be mounted between 60 and 66 inches above the floor, and eight to 10 feet apart.

Is Magic Tape safe for walls?

MaterialTapeBrandScotch

How do you hang string lights without holes?

Using Hooks If you can’t repurpose your backyard to hang the lights, then the next best option is to go with adhesive hooks. They can be bought at any hardware store and allow you to hang lights without leaving nail holes in your walls.

How can I hang Christmas lights without clips?

Purchase S-shaped gutter hooks at the home improvement store, and hang them up by pressing the top part of the S into the gutter, with the rest of the hook resting on the front. When you’re ready to hang the lights, simply use the bottom part of the S as a hook and string the wire of the lights into each hook.

Article first time published on

Are hanging lights a fire hazard?

Hanging lights with damaged cords can lead to an electrical short. This can damage your other lights and holiday decorations, as well as potentially lead to a fire. If you discover damaged strings of lights, throw them away.

Do LED lights get hot?

Do LEDs get hot? LEDs do give off some heat, but much less than energy-saving sticks, twisters and traditional light bulbs. Just as importantly, when used in your light fittings at home, LEDs don’t emit infrared (IR), only visible light.

Can Christmas lights cause a fire?

The Short Answer. Yes, Christmas tree lights can cause a fire. According to the National Fire Protection Association, an average of 770 fires are caused by Christmas lights every year. The main cause of these fires is an electrical fault and the risk for outdoor lights is the same for indoor lights.

Do LED lights ruin your walls?

LED strip lights are unlikely to damage walls, but this depends on various factors. The strength of their adhesive, the durability of paint or wallpaper, how long they’ve been applied for, and the climate can also impact how well LED strips bond to a surface.

Can you nail LED light strips?

Yes you can staple as long as no copper or led or resistor are touching. Make sure to not staple into the strip itself. … You’d better not, It has the risk of shorting out the circuit or breaking the circuit(if you want to staple the strips as your way).

Can I mount a ceiling light on the wall?

You cannot install all kinds of ceiling lights on walls. While installing chandeliers and the like on walls is out of the question, many ceiling lights may emit heat and light that make it unsuitable as a wall fixture.

How do you hang lights on wood without nails?

However, is there any way to hang them up without putting nails into the wall? One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence.

How do you put lights in a window?

Use at least 6-8 hooks per window, 1 in each corner and 1-2 on each side of the window so the lights can hang properly. Hang the lights on the hooks, spacing them evenly apart. Begin at the highest point on the window and work your way down. Slide the bulbs into the notch on the hooks.

How can I hang Christmas lights without gutters?

If you don’t have gutters, you can use clips to attach lights to your shingles instead. You can find clips that work for either application. A light-hanging pole is available with some light-clip kits. Hanging poles can reduce the need to climb a ladder.

Can you hang LED lights with Command Strips?

How To Restick LED Strip Lights. … Be careful not to oversaturate and water damage your LEDs. From here, you can select a new adhesive. This could be more W3 tape, extra-strong double-sided tape, Command strips, glue dots, or adhesive clips.

Can I use Command strips outside?

Yes you can with Command™ Outdoor Products. The adhesive should be applied to a clean, smooth, dry surface when the temperature is above 15°F (-9°C). The products hold strongly down to -20°F (-29°C).

How do you hang strings on stucco without drilling?

You can do this indoors by plugging the lights into an electric outlet. Replace bulbs as needed, then unplug the lights and take them outside. Arrange the lights along the line of clips, placing the cord in each clip as you go. Plug the light string into an outdoor outlet, using an extension cord if needed.

How do you hang lights next to bed?

Best practice: When hanging a bedside wall sconce, a good place to start is 30-36 inches above the top of the mattress (or slightly 6-12 inches above your shoulder sitting up against the headboard), and no more than a foot from the edges of the bed. This will vary some depending on the design of the sconce.

Are wall lights old fashioned?

Wall lights are very popular amongst interior designers and lighting experts. … Clearly, after a little further examination, wall lights are not old fashioned. In fact, they may be just the thing you need to provide the perfect finishing touch to any home.

Where do you hang bedside swing arm lamps?

The best way to find the correct mounting height is to have your clients get into bed and hunker down against the pillows in their normal reading position. Then measure from the floor to just above their shoulder height because the optimum spot to position task lighting is between head and work surface.