Use the 1/8-inch drill bit to drill pilot holes in the garage door where you marked with a pencil. Hold the handle up to the door so the holes are aligned, and secure with the screws provided in your handle kit. If you’re using two handles, repeat with second side.

How do I put a peephole in my garage door?

Install the peephole viewer (for insulated door) – Unscrew the exterior barrel from the interior barrel of the peephole viewer. Insert the external barrel into the hole you drilled on the outside of the garage door, and ask a helper to insert the interior barrel into the opposite hole.

What type of drill bit is used for metal?

Cobalt drill bits are used for drilling hard metal and steel. They dissipate heat quickly and are highly resistant to abrasions, making them better for drilling into hard metals than black oxide- or titanium-coated drill bits.

How do you drill through aluminum?

Aluminum is a soft metal and therefore a standard HSS drill bit will be able to drill into it. However because of the low melting point of aluminium a better choice would be to use a cobalt drill bit. The cobalt drill bit will dissipate heat quicker and ultimately assist in reducing heat build up.

How can I tell if my drill bit is for metal?

Bits designed to drill metal have flutes that taper to a point at either a 118- or 135-degree angle. Bits with a 118-degree point are general-purpose bits, while those with a 135-degree point are self-cleaning, which means they shed shards of metal instead of allowing them to accumulate around the shank.

What is a digital door viewer?

Introducing Yale Digital Door Viewers Yale Digital Door Viewers display an image of the person who visits your door, providing a safe way to identify, visitors before opening your door.

What is a DoorScope?

DoorScope is a revolutionary product that virtually eliminates the conventional peephole. With DoorViewer, you don’t have to approach the door, or strain your eyes to see visitors through a peephole anymore. … Without electrical connections, Doorscope is a simple, a do-it-yourself installation.

Can a regular drill bit drill through aluminum?

“Aluminum is a generally soft, nonferrous, ductile material with low density and naturally high resistance to corrosion. Aluminum is difficult to drill because its ductility and softness causes the material to make constant prolonged contact with the rake face, or cutting edges, of a drill.”

How do peephole lenses work?

Wide angle lenses capture more light than a flat lens because light coming from the sides can still impact it and be refracted. The peephole lens then condenses all of the light it collects down into a tiny stream that is then fed into the eye of whoever is looking through it.

What kind of drill bit do I need for aluminum?

High-speed steel (HSS) drill bits can drill wood, fiberglass, polyvinyl chloride (PVC) and soft metals such as aluminum. Cobalt drill bits are extremely hard and dissipate heat quickly. They’re mostly used for boring in aluminum and tough metals such as stainless steel.

Article first time published on

Can you screw into aluminum?

Self-tapping screws, also called sheet metal screws, are very versatile. They can be used to securely fasten metals together, including aluminum. … To use self-tapping screws, place the screw directly on the aluminum sheet. Stabilize the screw so it doesn’t tilt as it goes in and twist the screw into the metal.

How do you punch a hole in metal without a drill?

1. Start by using a centre punch and hammer on a steel block to create a small dent where the metal has been previously marked. …
2. Punch the hole on the side of the sheet metal or blank that will face outwards. …
3. There will likely be small burrs on the inner edge of the hole that has been punched.

How do I know which drill bit to use?

1. Use a bit 1/64” smaller than the target hole size for softwoods.
2. Use a bit exactly the same size as the hole when working on other materials.
3. If you’re not sure which to select, choose a drill bit 1/64” larger than the hole you wish to create.

What is a step drill bit used for?

A step drill bit can be used to drill a range of different sized holes with a single bit. Since each bit size drill holes less than 1/4″ deep, a step bit is mainly used for drilling thin material such as sheet metal.

What drill bit do I need to drill into concrete?

Drill bits that can drill through concrete are called masonry bits. They are also good for drilling through brick and stone. Drill bits with a tungsten carbide tip are the strongest; when it comes to solid concrete, the sharper the better. Masonry bits cut holes through concrete in two steps.

What is a masonry drill bit look like?

Masonry bits look like larger twist drills with a slightly tighter corkscrew shape. You can identify them thanks to their wide arrow-shaped heads. They’re commonly used in hammer drills to grind masonry down as they cut through it. You can use them on brickwork, stone, breeze blocks, and other hard stone surfaces.

Can masonry bits be used on metal?

The masonry bits work a heck of a lot better and don’t dance around as much on smooth steel. The only catch to using masonry bits on metal is that, since the tip is eccentric, it will drill a hole twice the diameter of the bit size. So for example, to drill a 1/2 inch hole, I’d use a 1/4 inch bit.

Can you see an eye through a peephole?

Simple peepholes may allow people outside to see inside. A fisheye lens offers little visibility from the outside, but that can be defeated using a peephole reverser. Some peepholes have a shutter that falls down on the hole when nobody inside is holding it.

What kind of lens is used in a door peephole?

Convex lenses are used in peepholes of house doors for security to provide a view of people or objects outside the doors.

Can you replace a door peephole?

You’ll have to drill a new 2-3/8-in. hole. Place it so the new hole eliminates the existing hole at the same time. You can probably leave the old peephole in place while you drill the new hole (to provide a firmer surface and prevent pilot bit wandering).

When drilling metal Should I use oil?

If you’re a handyman, any old oil you have laying around is better than none: motor oil, machine oil, ATF, WD-40, whatever. Don’t use something super flammable with a low flash temperature.

Can you use a spade bit on aluminum?

no, don’t use a spade bit, aluminum has a way of grabbing a drill bit and that can lead to an accident. If you have a drill pess that stands on the floor instead of one of the very small ones, you can purchase a 3/4-inch twist drill bit.

What is a countersink drill bit?

A countersink bit creates an area in the wood that matches the countersunk shape of the screw head. This shape allows the screw to contact the wood with an equal amount of force. This creates a strong joint between the screw and the wood.

What are the best screws to use with aluminum?

While many people worry that stainless steel fasteners, such as screws, bolts, nuts, or host of other options, won’t work with aluminum due to the risk of galvanic corrosion between the two very different metals, the truth is that stainless steel is the metal of choice for fasteners to secure your aluminum materials.

What kind of bolts Can you use with aluminum?

“Both steel bolts and stainless steel bolts can be used together with aluminium; however, we recommend that you check with your supplier about the type of aluminium you’re using, and the environment you’re using it in. Get guidance on how to avoid galvanic corrosion as well.”

Do self-tapping screws work in aluminum?

Self-tapping screws are good for use with metals, various types of plastics (plywood, fiberglass, polycarbonates), and cast or forged material, like iron, aluminum, brass or bronze. Self-tapping screws also work for surfaces where you can’t secure the rear end with a nut.

What can be used as cutting fluid?

• Kerosene and rubbing alcohol often give good results when working on aluminum.
• WD-40 and 3-In-One Oil work well on various metals. …
• Way oil (the oil made for machine tool ways) works as a cutting oil. …
• Motor oils have a slightly complicated relationship to machine tools.

Why is stainless drill hard?

It’s hard, it requires expensive cobalt or carbide bits and it takes a long time to drill. … What stainless tends to do is “work harden” fairly quickly when heated, and drilling at high speed creates a lot of heat. When stainless steel work hardens, it becomes very hard and extremely difficult to drill.