(This measurement is the length of the jaws from end to end and is maximum amount of contact your vise has with the workpiece.) The throat depth, measured from the top of the jaws to the top of the slide below it, is also something to consider. A longer throat depth means you can hold larger pieces more securely.

.

Correspondingly, how the size of bench vice is determined?

Vises are typically available in 4, 5, 6 & 8" sizes. These sizes refer to the width of the jaws. The larger and heavier the object to be held the larger the vise required. As a general rule of thumb, the maximum throat depth is typically proportionate to the jaw width.

Secondly, how many types of bench vice are there? There are two main styles: chain and yoke. The yoke type vise uses a screw to clamp down the pipe, and the chain style uses a chain for securing the pipe.

Beside above, how do you use a bench vice?

Ensure that the workbench is firmly secured to its base.

1. Check the vise for cracks or other damage before clamping a workpiece in it.
2. Use a vise large enough to hold the work without strain.
3. Place the workpiece in the vise so that the full clamping surface of the jaw supports the workpiece.

What is a good bench vise?

The 5 Best Bench Vises:

1. Wilton 11106 Bench Vise – Best Overall. The best workbench vise on the market, the Wilton 11106 is made from high strength steel.
2. TEKTON 54004 Bench Vise – Best Value.
3. Yost 750-DI Multi-Jaw Rotating Bench Vise.
4. Yost LV-4 Home Bench-Vise.
5. IRWIN 226306ZR Bench Vise.

Related Question Answers

What is a bench vise used for?

A vise is an essential instrument in carpentry and metalworking applications. Bench vises of different types can be attached directly to a workbench to hold the work piece during particular activities, for example, sawing, arranging, and drilling.

What are the different types of vices?

Types of Vise

• Woodworking Vice. Woodworking vice is one of the most popular tools among the different types of vises we have today.
• Metalworking Vice. Metalworking vice refers to a type of vice associated with two parallel iron jaws with a wide opening base.
• Pipe Vice.
• Vacuum Vise.
• Clamp-On Vise.
• Combined Vise.
• Handheld Vise.
• Angle Vise.

What is a machinist vise?

n a vise with two parallel iron jaws and a wide opening below. Synonyms: metalworking vise Type of: bench vise, vise. a holding device attached to a workbench; has two jaws to hold workpiece firmly in place.

What is vise throat depth?

Throat depth is the vertical distance from the top edge of the jaw (flush with the bench top) down to the top of the main screw and guide rods. For these vises, 3 to 4 inches is the optimal throat depth range.

Who makes a good bench vise?

• 1 Yost Vises 750-DI Review. The Yost 750-DI is perhaps the best bench vise for heavy-duty use on the market.
• 2 Yost Vises 455 Review.
• 3 IRWIN 4935505 Review.
• 4 Yost LV4 Review.
• What is a bench vise?
• Ways to use a bench vise.
• The Best Bench Vises in 2019 & 2020.
• Main types of bench vises.

At what height should a machine vice be installed?

The Bench Vice If you are installing a Bench Vice there are a few points that you should take into consideration. The top of the vice should be at the same height as the users elbow. The Fixed Jaw should protrude slightly over the edge of the bench to allow for long workpieces.

When not in use a bench vise should be left with?

Use only enough force to hold the workpiece. 46. Bench vises not in use should be left loose with the handle in a vertical orientation.

What is AC clamp?

A C-clamp is a type of clamp device typically used to hold a wood or metal workpiece, and often used in, but are not limited to, carpentry and welding.

What does it mean to be vice?

vice. A vice is a moral failing or a bad habit. Traditional examples of vice include drinking alcohol, smoking tobacco, and gambling in card games. But anything can be a vice, as long as there's someone out there who views it as bad behavior or a moral weakness. You might say, casually, "I don't drink, smoke, or gamble

What safety precautions should be adhered to when working with a vise?

Bench vise safety tips

• Cover your face and eyes with a shield, goggles and safety glasses.
• Always ensure the bench vise is securely fitted to the work table, with bolts placed in the right order.
• Keep the stationary jaw at a length of slightly beyond the working table to keep the long pieces away from interfering.

What is a bench vice made of?

2.2.1 Bench vice It is the most commonly used vice sometimes also known as parallel jaw vice. It essentially consists of a cast steel body, a movable jaw, a fixed jaw, both made of cast steel, a handle, a square threaded screw and a nut all made of mild steel.

What is a face vise?

The Face Vise. Face vises are designed specifically for holding wooden workpieces while such operations as drilling and sawing are performed. The traditional material is wood. A wood face vise consists of a movable front jaw that is mounted to a broad, square beam that slides in and out of a matching channel.

What is a front vise?

A front vise is the most generally useful vise on a typical workbench. It can be used for clamping parts on edge within the jaws, for clamping large parts in combination with a deadman, and for clamping parts on top of the workbench when used in combination with bench dogs.