You can place a solid piece of plywood below your mattress if you want a diy bunkie board. The thickness of the plywood should be at least 3/4 of an inch and should be a perfect fit for your bed. The mattress and frame size should be exact else wise it won’t fit well.

Can I just use plywood instead of a bunkie board?

You can use plywood instead of a bunkie board however plywood is less durable than a bunkie board and less aesthetically pleasing. A DIY bunkie board is a better alternative than using plywood alone.

What can you use instead of a bunkie board?

Standard bunkie board alternatives include slats, plywood, standard box springs, low profile box springs, and split bunkie boards. Depending on the type of bed and mattress you have, one of these bunkie board alternatives may be a better choice for you than a standard bunkie board.

How do you use plywood as a bunkie board?

Plywood can act as a great option to use as a bunkie board. Just make sure to wrap it in a piece of fabric (let your cat choose the color) to avoid splinters, punctures, etc. You can even choose to add another layer of padding in between the plywood and the mattress.

Is it OK to put a mattress on plywood?

Using plywood may not allow the mattress to breathe properly and the wood can hold moisture even mold. Wood under the mattress can splinter causing the mattress fabric to snag and unravel especially in the case of 2 sided models. A mattress with plywood will not give the same support as a fresh new mattress.

Can I use plywood for bed slats?

Anyone can replace their bed slats with 0.75-inch or thicker plywood to greatly increase the strength of the bed frame. Remove the existing slats, measure the bed frame, cut the plywood and sand the edges, then install it on the rails.

How do you make a homemade bunkie board?

1. Step 1: Get the Measurements of Your Bed Bas.
2. Step 2: Cut the Plywood to Size.
3. Step 3: Sand Down the Edges of the Board.
4. Step 4: Cut the Quilted Upholstery Fabric to Size.
5. Step 5: Adhere Two Pieces of Quilted Upholstery Fabric to the Board.

Are bunkie boards necessary?

Solid Foundations If you plan to place your mattress on a bed frame that already has a solid foundation (no slats), a bunkie board is not necessary. However, if you prefer your bed to have extra height, a bunkie board is a great way to add lift to your mattress without compromising its structure.

Do I need a bunkie board if I have slats?

Do I need to add a bunkie board if I have a bed with slats? No, a bunkie board provides the same support as bed slats. If your bed already has slats then you do not need to add a bunkie board unless your bed requires additional support.

What kind of wood should I use for a bunkie board?

The most common material to make bunkie boards is plywood. As you know, plywood is not a type of wood but a material made out of layers of wood veneer glued together. Wood veneer is a thin sheet of wood often used as a decorative top layer in wooden furniture.

Article first time published on

Can you use plywood on a metal bed frame?

Therefore, a simple metal frame with thin support beams will not hold up very well, but one with unyielding, thick wooden slats less than 4 inches apart will work fine. If you are considering using a metal frame, we suggest placing a piece of plywood on the top of the metal to close up the unsupported surface.

Can you use plywood under a foam mattress?

You are not supposed to have a solid surface like plywood under a memory foam mattress. The foam needs to breathe and putting it on a solid surface like a floor or plywood can cause it to grow mold.

Can I put plywood on top of box spring?

Plywood cut to the size of the mattress acts as a do-it-yourself mattress support that fits between mattress and box spring, making a mattress firmer. … Sand the board and edges smooth to prevent snagging or splinters, wipe the dust away and then set it on the box spring with the mattress on top.

Why do people put plywood under their mattress?

Plywood can help with a sagging mattress. … It will support the mattress from beneath, stopping it from sagging. If the issue is an older mattress, plywood can give you a temporary solution. Cut a piece of plywood to match the size and shape of the sagging area, and place it under the mattress in the soft spot.

Will plywood make a mattress firmer?

Plywood boards can enhance support, especially at the bottom of the mattress. Placing a plywood board on top of your box spring or on the slats is a step towards boosting your bed’s firmness. The strong piece of plywood lying beneath your mattress makes it feel firmer.

How thick should plywood be for a bed?

Plywood Measurements Plywood thinner than 3/4 inch should not be used, as it will not be strong enough to hold the weight of a bed mattress and a person lying down. The plywood can be exactly 3/4 inch thick, but ideally, it should be thicker.

What kind of plywood do you use for a bed frame?

Depending on your choice, you could either opt for MR grade plywood or BWP plywood. Both work exceptionally well for plywood bed frames. All our plywood varieties are extremely strong, durable and resilient even in the face of changing weather or temperature conditions.

What kind of plywood do you use under a mattress?

But it is best to use normal AB or BC softwood plywood. A smooth surface finish and rounded edges are critical to prevent snagging and damaging the mattress cover. All corners should be rounded with at least a one inch radius and edges should be rounded over with a ½” or larger router bit.

What can I use instead of bed slats?

• Plat Over Slat. One popular choice is the platform bed, which comes in many varieties. …
• Ply Your Trade. Foam mattresses tend to work better on solid platform beds than slatted beds, and the same rule applies to another popular alternative. …
• Dream Weaver.

Is hardwood plywood moisture resistant?

Is Plywood Waterproof? Plywood is best considered water-resistant, not waterproof. And, even then, “water-resistant” may be too strong a term! Small amounts of water won’t affect it, but prolonged exposure to moisture can be disastrous.

How do I keep my bed slats from breaking?

1. Put a Box Spring or Some Plywood Over the Slats. …
2. Secure the Slats to the Bed Frame. …
3. Use Slat Spacers. …
4. Add More Slats. …
5. Reinforce the Supportive Center Beam. …
6. Get Thicker or Stronger Wooden Slats. …
7. Use Metal Slats Instead.

Which is better Bunkie board or slats?

Slats can hold more weight and usually provide a sturdier foundation than regular bunkie boards. This is because bunkie boards are usually made of materials such as plywood and particleboard. … However, some bunkie boards are also made of materials that have a high weight-bearing capacity, like steel or solid wood.

Can I put a Bunkie board over slats?

Bunkie boards can be attached to metal or wooden bed frames, or placed on top of slats or old box springs. They can even be laid on the floor.

Do daybeds need bunkie boards?

Although simple in nature, bunkie boards are essential for any low-profile bed where you prefer not to add the height of a box spring or where clearance is an issue and you cannot fit a box spring. It can take the place of a box spring on platform beds, daybeds, trundles, bunk beds, and lofts.

Is a bunkie board as good as a box spring?

So, yes, a bunkie board can be used to make a box spring less noisy because adding a layer of a flat sheet of wood or plywood will support the mattress and prevent it from squeaking. The fact that almost every bunkie board is covered in fabric will even make it more beneficial for solving the problem.

Can I use a bunkie board with a box spring?

A bunkie board can be used with a box spring or older foundation or platform bed to ensure that it’s able to properly support the weight of a newer foam mattress.

Can you put foam mattress on slats?

Foam and hybrid mattresses must be placed on a solid surface or on slats no more than 2.75 inches apart. If your bed frame doesn’t have a solid base or the slats are further apart, you will need a flat base to place your mattress on.

Can I use MDF as Bunkie board?

Making a Bunkie Board Out of Plywood. … Is it possible to use these other plywood products for a Bunkie board? The simple answer is yes. But neither particle board, OSB or MDF, the options people are most likely to select, are going to be as strong as plywood will be.

How thick does a Bunkie board need to be?

A bunkie board is wooden or plyboard, 1 to 3 inches thick, that sits between your mattress and the bed frame. It can support your mattress like a pro and is a good box spring alternative. Bunkie boards fit perfectly over the wooden slats on your bed and prevent your mattress from falling off.

What is the best base for a foam mattress?

A thick piece of plywood makes a solid choice to lay your memory foam mattress on. If you own a foundation with slats for support, adding a solid piece of wood can improve the stability of your platform. Memory foam tends to sleep hot if it doesn’t have proper ventilation.

What kind of base does a foam mattress need?

All you need for your foam mattress is a solid base. Closely laid wooden slats, a metal base, a bunkie board, or even the floor will all do just fine in place of a box spring. That said, if your box spring is rigid and firm (less than an inch of give), it should be okay to use with a memory foam or latex mattress.