Hydrogen peroxide well water treatment for bacteria may not be as popular as other options for the treatment of bacteria-infested well water, but it is just as effective as, say, chlorination or shock treatment and, according to experts, is in fact safer.

Can I pour hydrogen peroxide into my well?

Hydrogen peroxide holds an advantage over chlorine as a well water disinfectant due to its chemical makeup. It disinfects through oxidation, splitting into oxygen and water. In the case of well water treatment, there is often bacteria that cannot be eliminated by chlorine.

What should I use to shock my well?

Overview. Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.

How much hydrogen peroxide should you put in your well?

You should generally inject 1.0 ppm of hydrogen peroxide for each part per million of iron or manganese, and 2 ppm of H2O2 for each 1.0 ppm of hydrogen sulfide gas (the cause of rotten egg smell in water).

Does hydrogen peroxide dissolve well in water?

Contrary to other chemical substances, hydrogen peroxide does not produce residues or gasses. Safety depends on the applied concentration, because hydrogen peroxide is completely water soluble. Hydrogen peroxide is a powerful oxidizer. It reacts with a variety of substances.

How do you treat a sulfur well?

Shock your well with chlorine bleach or hydrogen peroxide to get temporary relief from sulfur odors. Often keeps odors away for 1 – 2 months. 2. Chlorinator: Install a chlorine injector system (chlorinator) on your wellhead for continuous injection of chlorine when the water is running.

Can I add hydrogen peroxide to my brine tank?

You can sanitize the unit by pouring Hydrogen Peroxide or Chlorine Bleach in the brine well of the salt tank, and placing the unit into regeneration. Check with the seller, or, if they are no longer in business, any Professional Water Conditioning Dealer for how much to put in your particular unit.

Is it safe to pour bleach in your well?

4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach – (4 quarts in a gallon). Do not use excessive amounts of bleach – more is not more effective. 5) For best results the bleach should be combined with water before adding it to the well.

Should you pour bleach down your well?

Do not use bleach with a “fresh scent,” lemon fragrance, or other cleaners added. One gallon of bleach will treat up to an 8-inch diameter well containing 100 feet of water. If your well is much larger, or if your distribution system is unusually large, expect to use more than 1 gallon of bleach.

Can I put hydrogen peroxide in my water softener?

Frankly unless you’re an expert we recommend staying away from hydrogen peroxide for water softener sanitation. Run the water softener through a normal or manual regeneration cycle. This will cycle the bleach-solution out of the brine tank and through the resin tank.

Article first time published on

How much bleach do you use to shock a well?

CALCULATE AND POUR: Pour 3 pints of chlorine bleach per 100 gallons of water plus an additional 3 pints into your well as described above. MIX: Attach a clean garden hose to the outdoor faucet nearest the well and place the end of the hose inside the well.

How do you shock a dug well with bleach?

Dug well (1 meter/3 foot diameter) Add 1 litre (1 quart) of household bleach for every 1.5 metres (5 feet) of depth of water. If you don’t know how high the water stands, use the well casing depth to estimate how much household bleach to use.

How long should you run the water after shocking well?

Run the water out of the hose for about 10 minutes in an area away from the well, septic system, landscaping, and bodies of water. The water may be discolored. Continue monitoring and running the water until it runs clear.

Do you expect to see a reaction from mixing hydrogen peroxide and water?

Do you expect to see a reaction from mixing hydrogen peroxide and water? No the reaction is missing an enzyme. For the reaction to occur, you must have both the enzyme and substrate present.

Does hydrogen peroxide add oxygen to water?

When Hydrogen-Peroxide (H2O2) mixes with water (H2O) it releases its extra oxygen molecule. The net result is added oxygen in the water.

How does hydrogen peroxide water treatment work?

When hydrogen peroxide is injected into water, a large amount of dissolved oxygen is released and a strong oxidizing effect takes place. Odors are eliminated, microorganisms are destroyed, and tannins can be oxidized.

Should you put bleach in your brine tank?

Do not use splash proof bleach or bleach with any additives. Add new salt to the brine tank. Note: We strongly recommend using solar salt inside our systems. Pour three gallons of fresh, clean water into the brine tank.

Can bacteria grow in a water softener?

There will be bacteria in your water softener, but it is not harmful bacteria. Bacteria are found everywhere – particularly in substances where there are minerals, such as water. They are completely harmless and, in a lot of cases, help us to function as living things.

What neutralizes sulfur?

Baking soda is well known for erasing odours. And the best thing is that it’s very easy to use and efficient too. If the smell is coming from your clothes then, soak them in baking soda before washing. You can also sprinkle baking soda in all the corners of your house to get rid of the sulphur scent.

How do you remove hydrogen sulfide from well water?

Aeration. Since hydrogen sulfide occurs as a gas in water, it can be physically removed by injecting air into the water and allowing the gas to escape. Aeration units may work by cascading, bubbling, or stripping the gas from the water. Aeration may be advantageous because it does not add chemicals to the water.

How do you remove sulfur from well water?

Chlorine bleach can effectively remove medium to high levels (over 6 mg/l) of hydrogen sulfide. The chlorine in the bleach chemically reacts with (oxi- dizes) the hydrogen sulfide eliminating the “rotten egg” odor. Chlorine bleach also reacts with iron or manganese, and disinfects water supplies.

How long should you wait to drink water after you chlorinate a well?

Once the chlorinated water has reached all the appliances, fixtures and faucets, let the chlorinated water stand in the well and plumbing system for 8 hours. WHILE THE CHLORINE IS IN THE SYSTEM DO NOT DRINK THE WATER.

How much does it cost to shock a well?

To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 – $200.

Can I use pool shock in my well?

Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well. Don’t use stabilized swimming pool chlorine products or non-chlorinated “pool shock” products, as they are not effective enough to clean your drinking water.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

How do you shock a well for iron bacteria?

Shock Chlorination “Shock” chlorination is the process of using a strong chlorine solution to disinfect the well and system. The chlorine concentration should be close to but not greater than 200 parts per million (ppm). A concentration greater than 200 ppm reduces how effective the disinfection is.

Why do cows drink better with hydrogen peroxide in water?

Drinking water for farm animals Cows, pigs, poultry, sheep, goats, rabbits and birds and is said to be useful by increasing the oxygen levels to the blood and cells. When hydrogen peroxide has been used for cattle, an increase in milk production and an increase in butterfat content have been reported.

Does peroxide damage plumbing?

Hydrogen peroxide may already be in your medicine cabinet, and it is gentle enough to use in your pipes. If you notice your sink draining sluggishly, you can reach for a bottle of hydrogen peroxide instead of a more expensive chemical drain cleaner.

Should you inject hydrogen peroxide?

Hydrogen peroxide can be dangerous to humans when swallowed or injected. If you have some hydrogen peroxide in your medicine cabinet, it’s likely a 3 percent concentration. When swallowed, 3 percent hydrogen peroxide can cause stomach irritation and even chemical burns in some cases.

How often should I shock my well?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.

How can I naturally purify my well water?

Liquid chlorine in the form of household bleach and food grade white vinegar can be used to disinfect your well. When chlorine is added to water the pH level will rise. Food grade white vinegar is used to lower the water’s pH level so the chlorine will work effectively.