Install heat tapes on exterior surfaces and exposed pipes, not inside walls, floors or ceilings. Apply them directly on the pipe you want to protect from freezing, not around pipe insulation. * To avoid overheating, don’t cover heat tapes with insulation, even though some manufacturers may permit it.

Can heat tape start a fire?

Sadly, heat tape has the potential to cause fires in homes and businesses. Many of these products consist only of non-regulating tape which plugs into a wall outlet. If the heat tape remains activated for long periods of time – especially if temperatures rise and/or the tape is well-insulated – it can spark a fire.

What temperature does heat tape get to?

Lower power densities and temperatures, with maximum temperatures ranging from 150°F to 500°F, and including low-intensity cables well suited for freeze prevention. Higher power densities and temperatures, ranging from tapes with a maximum of 305° up to very-high-temperature tapes rated for up to 1400°F (760°C).

Can you leave heat tape plugged in all winter?

You can leave these models plugged in. The problem is that some people leave them plugged in for decades. Tucked away in a garden shed or crawl space, the tapes get hot in summer, cold in winter and soaked with moisture off and on year-round.

Can you use heat tape underground?

Never apply heat tape over itself (double wrapping) or over or under pipe insulation unless specifically recommended by the manufacturer. … Even buried, underground water pipes are subject to freezing.

How long does a heat tape last?

Speaking of replacing, heat tape only has a 3-year lifespan. Most heat tape manufacturers warn that you should replace your heat tapes every 3 years minimum. Heat tape has a near-constant connection with both water and electricity and usually isn’t protected well from the elements.

Will heat tape catch insulation on fire?

* To avoid overheating, don’t cover heat tapes with insulation, even though some manufacturers may permit it. If you do add insulation according to manufacturers’ instructions, use a nonflammable type, such as fiberglass, not foam or vinyl insulation that could catch fire from a failing heat tape.

When should you turn off heat tape?

In warmer months when there is no snow on the roof, turn heat tape off at the breaker switch or unplug it. Do not rely on built-in thermostats to make sure heat tape is not operating. drains that run through the wall of a home or garage. Leave these sections on 24/7.

Does heat tape work on PVC pipe?

Yes. Pipe Freeze PRO heat tape can be used on all varieties of pipes including PEX, ABS, PVC, Nylon, Steel, Copper and more.

How long does it take for heat tape to thaw pipes?

Space heaters, hair dryers, and heat lamps are all common household devices that can be used to thaw out pipes in 30 to 45 minutes. However, getting professional help is almost always advisable in case any pipes have burst from pressure build up.

Article first time published on

Can you shorten heat tape?

Yes! Heat tape is a thin laminate material that can be cut with any good quality scissor. The element that we sell has been specifically chosen for reptile rack and cage use and can be cut to almost any length. MAKE SURE THE ELEMENT IS UNPLUGGED WHEN TRIMMING!

What can I do with excess heat tape?

1 Answer. Usually you can wrap the tape around the pipe as you install it. You can then add or subtract wraps to adjust the length and make it come out where you want. This works well for just a short amount of slack.

What is the difference between heat tape and heat cable?

Heat cable is somewhat stiff, but it’s pliable enough to wrap it around your pipes, and it does not shrink; Heat tape is extremely flexible and is well suited to conforming to very tight contours where high temperatures are needed, therefore it’s better for tight contours and oddly shaped pipes.

Can you wrap heat tape around a pipe?

Use only automatic heat tape, with heavy rubber insulation around the wires. Do NOT use non-automatic heat tape, as this could damage plastic pipes. … Some types of heat tape wrap around the pipe, some run along one side of the pipe. Follow the manufacturer’s instructions.

What tape is heat resistant?

Fiberglass tapes, basalt tapes, and aluminum foil tapes are commonly used in high temperature gasketing, sealing, lagging, thermal insulation, and encapsulation applications around furnaces, ovens, and hot pipes.

How much electricity does a heat tape use?

Typical heat tape burns electricity at six to nine watts per foot per hour. That means each 100 feet of heat tape operating 24/7 can translate to an added monthly cost of $41 to $62 to operate heat tape, says Eileen Wysocki, energy auditor for Holy Cross Energy.

Do electricians install heat tape?

NOTE: Heat tape and heat cable installation should be completed by licensed professionals. Most manufacturers will not warranty products that were not installed by licensed electricians.

Can you put heat tape on frozen pipes?

You could also purchase some heat tape, sometimes called heat cable, from your local hardware store. Simply wrap it around the pipe evenly and plug it in. The cable will warm up the pipe and thaw the frozen ice. Apply heat until the water flow is restored.

How long does gutter heat tape last?

Most heat cable doesn’t even last long to begin with; the average life of heat cable seems to be around 3-5 years.

When should you run roof heat cables?

When should you turn on roof heat cables? Roof heat cables are designed to prevent ice dams from forming. They work best if you turn them on about an hour or two before the snow is expected to start falling. This helps warm the roof up so that the snow will melt immediately as it falls on it.

How much does heat tape cost per foot?

Heat Tape Installation Cost Heat wire costs between $12 and $20 per foot to install. This cost varies depending on the difficulty of the project.

How do I know if my pipes froze?

The clearest sign that you have frozen pipes is if there is a complete lack of water coming out of your faucets and fixtures. This means that the water in your supply lines has frozen solid. In some cases, due to a partial freeze, you may still see a slight trickle of water.

How do I unfreeze my outside water pipes?

Use a space heater, heat lamp, or hair dryer to thaw the frozen length of pipe. Wrapping freezing pipes with thermostatically controlled heat tape (from $50 to $200, depending on length) is also an effective way to quickly thaw a trouble spot. Don’t thaw pipes using a propane torch, which presents a fire risk.

What do you do if your cold water pipes freeze?

1. Keep your faucet open. …
2. Apply heat to the section of the pipe that is frozen. …
3. Know what not to do. …
4. Continue applying heat until water flow returns to normal. …
5. Take swift action if the frozen pipes are located inside an exterior wall.

Is heat tape better than a heat mat?

Heat tape is a lot more flimsy and does better in racks especially where the heat is recessed (no direct contact when sliding the tub out), for stand alone tubs that may move around, heat pad are just a better option IMO, a lot sturdier especially the ultratherms.

How long does it take heat tape to warm up?

Switch the power source back on to the heat tape. Feel along the length of the heat tape. It should be getting warm. If the heat tape fails to warm up, after 10 minutes, the thermostat or the heat tape itself is bad.

How do you calculate heat tape for pipes?

To determine required heater length (Lh), multiply length of pipe (Lp) by (Rp). Lh = Lp x Rp.

Can heat tape be used on PEX?

No. You should not use any type of adhesive material on PEX pipe as over time the adhesive material can interact with the PEX and leech into your water. You can use a heating strip wrapped around the pipe so long as it has no adhesive material.